On 07/11/2013 02:18 AM, Guenter Roeck wrote: > On Wed, Jul 10, 2013 at 07:25:38PM +0800, Wei Ni wrote: >> When the temperature exceed the limit range value, >> the driver can handle the interrupt. >> >> Signed-off-by: Wei Ni <wni@xxxxxxxxxx> >> --- >> drivers/hwmon/lm90.c | 77 +++++++++++++++++++++++++++++++++++++++++--------- >> 1 file changed, 64 insertions(+), 13 deletions(-) >> >> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c >> index 2cb7f8e..88ff362 100644 >> --- a/drivers/hwmon/lm90.c >> +++ b/drivers/hwmon/lm90.c >> @@ -89,6 +89,7 @@ >> #include <linux/err.h> >> #include <linux/mutex.h> >> #include <linux/sysfs.h> >> +#include <linux/interrupt.h> >> >> /* >> * Addresses to scan >> @@ -179,6 +180,19 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, >> #define LM90_HAVE_TEMP3 (1 << 6) /* 3rd temperature sensor */ >> #define LM90_HAVE_BROKEN_ALERT (1 << 7) /* Broken alert */ >> >> +/* LM90 status */ >> +#define LM90_LTHRM (1 << 0) /* local THERM limit tripped */ >> +#define LM90_RTHRM (1 << 1) /* remote THERM limit tripped */ >> +#define LM90_OPEN (1 << 2) /* remote is an open circuit */ >> +#define LM90_RLOW (1 << 3) /* remote low temp limit tripped */ >> +#define LM90_RHIGH (1 << 4) /* remote high temp limit tripped */ >> +#define LM90_LLOW (1 << 5) /* local low temp limit tripped */ >> +#define LM90_LHIGH (1 << 6) /* local high temp limit tripped */ >> +#define LM90_BUSY (1 << 7) /* ADC is converting */ >> + >> +#define MAX6696_RLOW (1 << 3) /* remote2 low temp limit tripped */ >> +#define MAX6696_RHIGH (1 << 4) /* remote2 high temp limit tripped */ >> + >> /* >> * Driver data (common to all clients) >> */ >> @@ -1423,6 +1437,43 @@ static void lm90_init_client(struct i2c_client *client) >> i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config); >> } >> >> +static void lm90_alarm_status(struct i2c_client *client, >> + u8 alarms, u8 alarms_max6696) >> +{ > If you are introdcing a function to evaluate the alarm status, you might as well > copy the register reads as well as the mask evaluations into this function. > > If you don't want to see the "Everything ok" output if nothing is wrong, it can > return a boolean indicating if a status bit was set. This way the calling code > can also more easily determine if it should return IRQ_NONE or IRQ_HANDLED. Yes, you are right, I will change change the function to: lm90_is_tripped(*client) { /* read status register */ /* check bit */ /* return true or false to indicate if the limit tripped */ } > >> + if (alarms & (LM90_LLOW | LM90_LHIGH | LM90_LTHRM)) >> + dev_warn(&client->dev, >> + "temp%d out of range, please check!\n", 1); >> + if (alarms & (LM90_RLOW | LM90_RHIGH | LM90_RTHRM)) >> + dev_warn(&client->dev, >> + "temp%d out of range, please check!\n", 2); >> + if (alarms & LM90_OPEN) >> + dev_warn(&client->dev, >> + "temp%d diode open, please check!\n", 2); >> + >> + if (alarms_max6696 & (MAX6696_RLOW | MAX6696_RHIGH)) >> + dev_warn(&client->dev, >> + "temp%d out of range, please check!\n", 3); >> +} >> + >> +static irqreturn_t lm90_irq_thread(int irq, void *dev_id) >> +{ >> + struct lm90_data *data = dev_id; >> + struct i2c_client *client = to_i2c_client(data->hwmon_dev->parent); >> + u8 alarms, alarms_max6696 = 0; >> + > Please stick with alarms2 instead of alarms_max6696 as in the original code. > >> + lm90_read_reg(client, LM90_REG_R_STATUS, &alarms); >> + >> + if (data->kind == max6696) >> + lm90_read_reg(client, MAX6696_REG_R_STATUS2, &alarms_max6696); >> + >> + if ((alarms & 0x7f) == 0 && (alarms_max6696 & 0xfe) == 0) { >> + return IRQ_NONE; >> + } else { > > That else statement is unnecessary. > >> + lm90_alarm_status(client, alarms, alarms_max6696); >> + return IRQ_HANDLED; >> + } >> +} >> + >> static int lm90_probe(struct i2c_client *client, >> const struct i2c_device_id *id) >> { >> @@ -1499,6 +1550,18 @@ static int lm90_probe(struct i2c_client *client, >> goto exit_remove_files; >> } >> >> + if (client->irq >= 0) { >> + dev_dbg(dev, "lm90 IRQ: %d\n", client->irq); >> + err = devm_request_threaded_irq(dev, client->irq, >> + NULL, lm90_irq_thread, >> + IRQF_TRIGGER_LOW | IRQF_ONESHOT, >> + "lm90", data); >> + if (err < 0) { >> + dev_err(dev, "cannot request interrupt\n"); >> + goto exit_remove_files; >> + } >> + } >> + >> return 0; >> >> exit_remove_files: >> @@ -1532,19 +1595,7 @@ static void lm90_alert(struct i2c_client *client, unsigned int flag) >> if ((alarms & 0x7f) == 0 && (alarms2 & 0xfe) == 0) { >> dev_info(&client->dev, "Everything OK\n"); >> } else { >> - if (alarms & 0x61) >> - dev_warn(&client->dev, >> - "temp%d out of range, please check!\n", 1); >> - if (alarms & 0x1a) >> - dev_warn(&client->dev, >> - "temp%d out of range, please check!\n", 2); >> - if (alarms & 0x04) >> - dev_warn(&client->dev, >> - "temp%d diode open, please check!\n", 2); >> - >> - if (alarms2 & 0x18) >> - dev_warn(&client->dev, >> - "temp%d out of range, please check!\n", 3); >> + lm90_alarm_status(client, alarms, alarms2); >> >> /* >> * Disable ALERT# output, because these chips don't implement >> -- >> 1.7.9.5 >> >> -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html