From: Stephen Warren <swarren@xxxxxxxxxx> Commit 4c94c8b "ARM: tegra: update device trees for USB binding rework" added regulator definitions for GPIO-controlled USB VBUS. However, none of these contained the essential DT property enable-active-high. Add this so that the regulator definitions are correct. Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx> --- I'm sending this to arm-soc to be taken into v3.11-rc1. However, if it won't get in until -rc2, let me know; I'd be tempted not to fix it in 3.11 in that case, so I don't have to wait until v3.11-rc2 before applying patches that use these new regulators, since they rely on this fix going in first. arch/arm/boot/dts/tegra20-seaboard.dts | 1 + arch/arm/boot/dts/tegra20-trimslice.dts | 1 + arch/arm/boot/dts/tegra20-whistler.dts | 2 ++ 3 files changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 9c5cb54..7f460bb 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -814,6 +814,7 @@ regulator-name = "vdd_vbus_wup1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + enable-active-high; gpio = <&gpio 24 0>; /* PD0 */ }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index a997eaf..77efb09 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -417,6 +417,7 @@ regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + enable-active-high; gpio = <&gpio 170 0>; /* PV2 */ }; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index e07f210..a6b1b5b 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -584,6 +584,7 @@ regulator-name = "vbus1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + enable-active-high; gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ }; @@ -593,6 +594,7 @@ regulator-name = "vbus3"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + enable-active-high; gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ }; }; -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
