This patch changes the Tegra20 USB PHY nodes to use the UTMI configuration parameter names as specified in the device tree binding documentation after patch "ARM: tegra: finalize USB EHCI and PHY bindings". Signed-off-by: Mikko Perttunen <mperttunen@xxxxxxxxxx> --- arch/arm/boot/dts/tegra20.dtsi | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 9653fd8..e457083 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -477,13 +477,13 @@ <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; nvidia,has-legacy-mode; - hssync_start_delay = <9>; - idle_wait_delay = <17>; - elastic_limit = <16>; - term_range_adj = <6>; - xcvr_setup = <9>; - xcvr_lsfslew = <1>; - xcvr_lsrslew = <1>; + nvidia,hssync-start-delay = <9>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <1>; + nvidia,xcvr-lsrslew = <1>; status = "disabled"; }; @@ -527,13 +527,13 @@ <&tegra_car TEGRA20_CLK_CLK_M>, <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; - hssync_start_delay = <9>; - idle_wait_delay = <17>; - elastic_limit = <16>; - term_range_adj = <6>; - xcvr_setup = <9>; - xcvr_lsfslew = <2>; - xcvr_lsrslew = <2>; + nvidia,hssync-start-delay = <9>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; status = "disabled"; }; -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
