When the CPU cluster power down, the vGIC is powered down too. The flow controller needs to monitor the legacy interrupt controller to wake up CPU. So setting up the appropriate wake up event in flow controller. Signed-off-by: Joseph Lo <josephl@xxxxxxxxxx> --- arch/arm/mach-tegra/flowctrl.h | 2 ++ arch/arm/mach-tegra/sleep-tegra30.S | 6 +++++- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h index e56a950..de0acb9 100644 --- a/arch/arm/mach-tegra/flowctrl.h +++ b/arch/arm/mach-tegra/flowctrl.h @@ -28,6 +28,8 @@ #define FLOW_CTRL_SCLK_RESUME (1 << 27) #define FLOW_CTRL_HALT_CPU_IRQ (1 << 10) #define FLOW_CTRL_HALT_CPU_FIQ (1 << 8) +#define FLOW_CTRL_HALT_LIC_IRQ (1 << 11) +#define FLOW_CTRL_HALT_LIC_FIQ (1 << 10) #define FLOW_CTRL_HALT_GIC_IRQ (1 << 9) #define FLOW_CTRL_HALT_GIC_FIQ (1 << 8) #define FLOW_CTRL_CPU0_CSR 0x8 diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 6744161..ecad4ea 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -175,8 +175,12 @@ tegra30_enter_sleep: orr r0, r0, #FLOW_CTRL_CSR_ENABLE str r0, [r6, r2] + tegra_get_soc_id TEGRA_APB_MISC_BASE, r10 + cmp r10, #TEGRA30 mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT - orr r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ + orreq r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ + orrne r0, r0, #FLOW_CTRL_HALT_LIC_IRQ | FLOW_CTRL_HALT_LIC_FIQ + cpu_to_halt_reg r2, r1 str r0, [r6, r2] dsb -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
