The flow controller can help CPU to go into suspend mode (powered-down state). When CPU goes into powered-down state, it needs some careful settings before getting into and after leaving. The enter and exit functions do that by configuring appropriate mode for flow controller. For Tegra114, the setting is compatible with Tegra30. Signed-off-by: Joseph Lo <josephl@xxxxxxxxxx> --- arch/arm/mach-tegra/flowctrl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c index b477ef3..5348543 100644 --- a/arch/arm/mach-tegra/flowctrl.c +++ b/arch/arm/mach-tegra/flowctrl.c @@ -86,6 +86,7 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid) reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid; break; case TEGRA30: + case TEGRA114: /* clear wfe bitmap */ reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfi bitmap */ @@ -123,6 +124,7 @@ void flowctrl_cpu_suspend_exit(unsigned int cpuid) reg &= ~TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP; break; case TEGRA30: + case TEGRA114: /* clear wfe bitmap */ reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfi bitmap */ -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html