Tegra 114 is different with other Tegra SoC chips. It using ARM Cortex-A15 as CPU core and a enhanced flow controller for CPU power control. So we need to skip some code that was for Contex-A9 and some other support code that was for other Tegra SoC chips. Then adding the proper power up and hot plug control for Tegra114. Verified on Seaboard, Cardhu and Dalmore. V2: * Double confirmed the patch set is OK with THUMB2_KERNEL enabled. Joseph Lo (6): ARM: tegra: add an assembly marco to check Tegra SoC ID ARM: tegra: skip SCU and PL310 code when CPU is not Cortex-A9 ARM: tegra: make tegra_resume can work for Tegra114 ARM: tegra114: add power up sequence for warm boot CPU clk: tegra114: implement wait_for_reset and disable_clock for tegra_cpu_car_ops ARM: tegra114: add CPU hotplug support arch/arm/mach-tegra/Makefile | 1 + arch/arm/mach-tegra/flowctrl.h | 1 + arch/arm/mach-tegra/fuse.h | 22 ++++++++-------- arch/arm/mach-tegra/hotplug.c | 2 ++ arch/arm/mach-tegra/platsmp.c | 25 +++++++++++++++++- arch/arm/mach-tegra/reset-handler.S | 51 +++++++++++++++++++++---------------- arch/arm/mach-tegra/sleep-tegra30.S | 30 ++++++++++++++++++---- arch/arm/mach-tegra/sleep.S | 8 +++--- arch/arm/mach-tegra/sleep.h | 35 ++++++++++++++++++++----- drivers/clk/tegra/clk-tegra114.c | 23 ++++++++++++++++- 10 files changed, 150 insertions(+), 48 deletions(-) -- 1.8.2.2 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html