Tegra114 is an ARM Cortex-A15 based SoC and some of the flow controller hardware behavior and configurations are different with other Tegra series. We fix the common resume function of tegra_resume to make it can work on Tegra114 by checking SoC ID. And also checking CPU primary part number to isolate the support code for Cortex A9 and A15. Signed-off-by: Joseph Lo <josephl@xxxxxxxxxx> --- arch/arm/mach-tegra/reset-handler.S | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 525f1b9..893f6b7 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -47,22 +47,25 @@ ENTRY(tegra_resume) THUMB( it ne ) bne cpu_resume @ no -#ifdef CONFIG_ARCH_TEGRA_3x_SOC +#ifndef CONFIG_ARCH_TEGRA_2x_SOC /* Are we on Tegra20? */ tegra_check_soc_id TEGRA20, TEGRA_APB_MISC_BASE, r6, r7 beq 1f @ Yes /* Clear the flow controller flags for this CPU. */ - mov32 r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR @ CPU0 CSR - ldr r1, [r2] + cpu_to_csr_req r1, r0 + mov32 r2, TEGRA_FLOW_CTRL_BASE + ldr r1, [r2, r1] /* Clear event & intr flag */ orr r1, r1, \ #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG - movw r0, #0x0FFD @ enable, cluster_switch, immed, & bitmaps + movw r0, #0x3FFD @ enable, cluster_switch, immed, & bitmaps bic r1, r1, r0 str r1, [r2] 1: #endif + check_cpu_part_num 0xc09, r8, r9 + bne not_ca9 #ifdef CONFIG_HAVE_ARM_SCU /* enable SCU */ mov32 r0, TEGRA_ARM_PERIF_BASE @@ -73,6 +76,7 @@ ENTRY(tegra_resume) /* L2 cache resume & re-enable */ l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr +not_ca9: b cpu_resume ENDPROC(tegra_resume) -- 1.8.2.2 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
