On Tue, Apr 23, 2013 at 11:39:02PM +0530, Bibek Basu wrote: > Make pinmux as the first node of tegra DT > so as to achieve pinctrl as last device to suspend and > first device to resume. I don't think this is a good idea. For one it encodes Linux specific implementation details within the device tree. Furthermore I seem to remember that the device tree makes no guarantees that the order of nodes in the blob is the same as the order in the DTS. That said I don't have a good alternative. Perhaps one solution would be to use suspend_late() and resume_early() for the pinmux driver since they will be called after and before the suspend() and resume() callbacks of all other devices, respectively. Other than that I wasn't able to find anything about forcing a particular order during suspend and resume. Cc'ing Rafael and the linux-pm mailing list, maybe somebody among them knows a proper solution. Thierry > > Signed-off-by: Bibek Basu <bbasu@xxxxxxxxxx> > --- > arch/arm/boot/dts/tegra114.dtsi | 12 ++++++------ > arch/arm/boot/dts/tegra20.dtsi | 16 ++++++++-------- > arch/arm/boot/dts/tegra30.dtsi | 13 +++++++------ > 3 files changed, 21 insertions(+), 20 deletions(-) > > diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi > index a58a761..36596ae 100644 > --- a/arch/arm/boot/dts/tegra114.dtsi > +++ b/arch/arm/boot/dts/tegra114.dtsi > @@ -11,6 +11,12 @@ > serial3 = &uartd; > }; > > + pinmux: pinmux { > + compatible = "nvidia,tegra114-pinmux"; > + reg = <0x70000868 0x148 /* Pad control registers */ > + 0x70003000 0x40c>; /* Mux registers */ > + }; > + > host1x { > compatible = "nvidia,tegra114-host1x", "simple-bus"; > reg = <0x50000000 0x00028000>; > @@ -165,12 +171,6 @@ > interrupt-controller; > }; > > - pinmux: pinmux { > - compatible = "nvidia,tegra114-pinmux"; > - reg = <0x70000868 0x148 /* Pad control registers */ > - 0x70003000 0x40c>; /* Mux registers */ > - }; > - > /* > * There are two serial driver i.e. 8250 based simple serial > * driver and APB DMA based serial driver for higher baudrate > diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi > index a5a9615..6d8a663 100644 > --- a/arch/arm/boot/dts/tegra20.dtsi > +++ b/arch/arm/boot/dts/tegra20.dtsi > @@ -12,6 +12,14 @@ > serial4 = &uarte; > }; > > + pinmux: pinmux { > + compatible = "nvidia,tegra20-pinmux"; > + reg = <0x70000014 0x10 /* Tri-state registers */ > + 0x70000080 0x20 /* Mux registers */ > + 0x700000a0 0x14 /* Pull-up/down registers */ > + 0x70000868 0xa8>; /* Pad control registers */ > + }; > + > host1x { > compatible = "nvidia,tegra20-host1x", "simple-bus"; > reg = <0x50000000 0x00024000>; > @@ -196,14 +204,6 @@ > interrupt-controller; > }; > > - pinmux: pinmux { > - compatible = "nvidia,tegra20-pinmux"; > - reg = <0x70000014 0x10 /* Tri-state registers */ > - 0x70000080 0x20 /* Mux registers */ > - 0x700000a0 0x14 /* Pull-up/down registers */ > - 0x70000868 0xa8>; /* Pad control registers */ > - }; > - > das { > compatible = "nvidia,tegra20-das"; > reg = <0x70000c00 0x80>; > diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi > index 9f33086..b4b79f0 100644 > --- a/arch/arm/boot/dts/tegra30.dtsi > +++ b/arch/arm/boot/dts/tegra30.dtsi > @@ -12,6 +12,13 @@ > serial4 = &uarte; > }; > > + pinmux: pinmux { > + compatible = "nvidia,tegra30-pinmux"; > + reg = <0x70000868 0xd4 /* Pad control registers */ > + 0x70003000 0x3e4>; /* Mux registers */ > + }; > + > + > host1x { > compatible = "nvidia,tegra30-host1x", "simple-bus"; > reg = <0x50000000 0x00024000>; > @@ -216,12 +223,6 @@ > interrupt-controller; > }; > > - pinmux: pinmux { > - compatible = "nvidia,tegra30-pinmux"; > - reg = <0x70000868 0xd4 /* Pad control registers */ > - 0x70003000 0x3e4>; /* Mux registers */ > - }; > - > /* > * There are two serial driver i.e. 8250 based simple serial > * driver and APB DMA based serial driver for higher baudrate > -- > 1.8.1.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-tegra" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > >
Attachment:
pgpI8lbpwBa7k.pgp
Description: PGP signature