Re: [PATCH] ARM: tegra: Add charger subnode to tps65090 node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/10/2013 6:30 PM, Stephen Warren wrote:
> On 04/10/2013 01:51 PM, Rhyland Klein wrote:
>> The charger is now represented by a distinct subnode of the tps65090
>> device. Add this node and enable low current charging with it.
> 
>> diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
> 
>> +			charger {
>> +				compatible = "ti,tps65090-charger";
>> +				ti,enable-low-current-chrg;
> 
> So does the TPS65090 driver scan all its sub-nodes like a bus an
> instantiate anything? That's a little odd since the regulators node is
> at the same level, yet doesn't represent a device on that same internal
> bus...
> 

It doesn't scan so much as have a list of subdev's it tries to register.
The charger node uses the of_compatible string defined (in the tps65090
driver and the charger driver) to match the subnode to the mfd_cell
device for the charger. The regulators are currently under a different
subdevice which is not using the of_compatible string. I was planning on
a follow up patch series to update the tps65090-regulator driver to use
the dt type approach with a subnode to be consistent.

-rhyland

-- 
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux