> -----Original Message----- > From: Stephen Warren [mailto:swarren@xxxxxxxxxxxxx] > Sent: Thursday, April 04, 2013 12:47 AM > To: Venu Byravarasu > Cc: gregkh@xxxxxxxxxxxxxxxxxxx; balbi@xxxxxx; > stern@xxxxxxxxxxxxxxxxxxx; linux-tegra@xxxxxxxxxxxxxxx; linux- > usb@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx > Subject: Re: [PATCH v2 2/7] ARM: tegra: update device trees for USB binding > rework > > On 04/03/2013 02:41 AM, Venu Byravarasu wrote: > > This patch updates all Tegra board files so that they contain all the > > The binding documentation says that the vbus-supply property is required > in all cases. However, many of the DT files still don't have that > property even after this patch. That's inconsistent. Will edit the binding to have the vbus-supply only for otg cases. > > > diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts > b/arch/arm/boot/dts/tegra20-iris-512.dts > > index 52f1103..c99eccc 100644 > > --- a/arch/arm/boot/dts/tegra20-iris-512.dts > > +++ b/arch/arm/boot/dts/tegra20-iris-512.dts > > @@ -41,6 +41,10 @@ > > dr_mode = "otg"; > > }; > > > > + usb-phy@c5000000 { > > + dr_mode = "otg"; > > + }; > > Since this port claims to be OTG-capable, presumably a vbus-supply > property is mandatory here? If you don't know enough about the board to > correctly set up such a regulator, lets just mark this port as host-only > for now; we can switch it back to OTG-mode later once someone implements > the required regulator. This won't lose any functionality, since we > don't support OTG-mode yet anyway. However, it will allow the device > tree to be correct/consistent in the mean time. Agree completely. Will update the patch accordingly and send for review. > > > diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts > b/arch/arm/boot/dts/tegra20-seaboard.dts > > > + usb-phy@c5000000 { > > + vbus-supply = <&vbus_reg>; > > + dr_mode = "otg"; > > + }; > > Where is the nvidia,vbus-gpio property? Since your code changes don't > actually implement use of the vbus-supply property yet, they will expect > the vbus-gpio property to exist in the PHY node. As of now Vbus-gpio is being used by EHCI driver only. As anyways we wanted to use vbus-supply, will implement its support in PHY driver and remove vbus-gpio from EHCI node. Hence did not add vbus-gpio to PHY DT nodes. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
