In addition to providing the BCT configuration that is common for all
Tegra20 Tamonten-derived boards, add scripts to build images that can
be flashed to NAND for the Plutux, Medcom-Wide and TEC boards.
Signed-off-by: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
---
.../Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.cfg | 132 +++++++++++++++++++++
tamonten/build.sh | 35 ++++++
tamonten/tegra20-medcom-wide/build.sh | 23 ++++
.../tegra20-medcom-wide/tegra20-medcom-wide.cfg | 22 ++++
tamonten/tegra20-plutux/build.sh | 23 ++++
tamonten/tegra20-plutux/tegra20-plutux.cfg | 22 ++++
tamonten/tegra20-tec/build.sh | 23 ++++
tamonten/tegra20-tec/tegra20-tec.cfg | 22 ++++
8 files changed, 302 insertions(+)
create mode 100644 tamonten/Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.cfg
create mode 100755 tamonten/build.sh
create mode 100755 tamonten/tegra20-medcom-wide/build.sh
create mode 100644 tamonten/tegra20-medcom-wide/tegra20-medcom-wide.cfg
create mode 100755 tamonten/tegra20-plutux/build.sh
create mode 100644 tamonten/tegra20-plutux/tegra20-plutux.cfg
create mode 100755 tamonten/tegra20-tec/build.sh
create mode 100644 tamonten/tegra20-tec/tegra20-tec.cfg
diff --git a/tamonten/Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.cfg b/tamonten/Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.cfg
new file mode 100644
index 0000000..16ff9af
--- /dev/null
+++ b/tamonten/Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.cfg
@@ -0,0 +1,132 @@
+# Copyright (C) 2011-2013 Avionic Design GmbH
+#
+# This software is provided 'as-is', without any express or implied
+# warranty. In no event will the authors be held liable for any damages
+# arising from the use of this software.
+#
+# Permission is granted to anyone to use this software for any purpose,
+# including commercial applications, and to alter it and redistribute it
+# freely, subject to the following restrictions:
+#
+# 1. The origin of this software must not be misrepresented; you must not
+# claim that you wrote the original software. If you use this software
+# in a product, an acknowledgment in the product documentation would be
+# appreciated but is not required.
+# 2. Altered source versions must be plainly marked as such, and must not be
+# misrepresented as being the original software.
+# 3. This notice may not be removed or altered from any source distribution.
+
+Version = 0x00020001;
+BlockSize = 0x00020000;
+PageSize = 0x00000800;
+PartitionSize = 0x01000000;
+OdmData = 0x2b2d8011;
+
+DevType[0] = NvBootDevType_Nand;
+DeviceParam[0].NandParams.ClockDivider = 0x00000004;
+DeviceParam[0].NandParams.NandTiming2 = 0x0000000a;
+DeviceParam[0].NandParams.NandTiming = 0x3b269213;
+DeviceParam[0].NandParams.BlockSizeLog2 = 0x00000000;
+DeviceParam[0].NandParams.PageSizeLog2 = 0x00000000;
+
+SDRAM[0].MemoryType = NvBootMemoryType_Ddr2;
+SDRAM[0].PllMChargePumpSetupControl = 0x00000008;
+SDRAM[0].PllMLoopFilterSetupControl = 0x00000000;
+SDRAM[0].PllMInputDivider = 0x0000000c;
+SDRAM[0].PllMFeedbackDivider = 0x0000029a;
+SDRAM[0].PllMPostDivider = 0x00000000;
+SDRAM[0].PllMStableTime = 0x0000012c;
+SDRAM[0].EmcClockDivider = 0x00000001;
+SDRAM[0].EmcAutoCalInterval = 0x00000000;
+SDRAM[0].EmcAutoCalConfig = 0xe0a61111;
+SDRAM[0].EmcAutoCalWait = 0x00000000;
+SDRAM[0].EmcPinProgramWait = 0x00000000;
+SDRAM[0].EmcRc = 0x00000014;
+SDRAM[0].EmcRfc = 0x00000041;
+SDRAM[0].EmcRas = 0x0000000f;
+SDRAM[0].EmcRp = 0x00000005;
+SDRAM[0].EmcR2w = 0x00000004;
+SDRAM[0].EmcW2r = 0x00000005;
+SDRAM[0].EmcR2p = 0x00000003;
+SDRAM[0].EmcW2p = 0x0000000b;
+SDRAM[0].EmcRrd = 0x00000004;
+SDRAM[0].EmcRdRcd = 0x00000005;
+SDRAM[0].EmcWrRcd = 0x00000005;
+SDRAM[0].EmcRext = 0x00000001;
+SDRAM[0].EmcWdv = 0x00000003;
+SDRAM[0].EmcQUseExtra = 0x00000000;
+SDRAM[0].EmcQUse = 0x00000004;
+SDRAM[0].EmcQRst = 0x00000003;
+SDRAM[0].EmcQSafe = 0x00000009;
+SDRAM[0].EmcRdv = 0x0000000c;
+SDRAM[0].EmcRefresh = 0x000004df;
+SDRAM[0].EmcBurstRefreshNum = 0x00000000;
+SDRAM[0].EmcPdEx2Wr = 0x00000003;
+SDRAM[0].EmcPdEx2Rd = 0x00000003;
+SDRAM[0].EmcPChg2Pden = 0x00000005;
+SDRAM[0].EmcAct2Pden = 0x00000005;
+SDRAM[0].EmcAr2Pden = 0x00000001;
+SDRAM[0].EmcRw2Pden = 0x0000000e;
+SDRAM[0].EmcTxsr = 0x000000c8;
+SDRAM[0].EmcTcke = 0x00000003;
+SDRAM[0].EmcTfaw = 0x0000000f;
+SDRAM[0].EmcTrpab = 0x00000006;
+SDRAM[0].EmcTClkStable = 0x0000000f;
+SDRAM[0].EmcTClkStop = 0x00000002;
+SDRAM[0].EmcTRefBw = 0x00000000;
+SDRAM[0].EmcFbioCfg1 = 0x00000000;
+SDRAM[0].EmcFbioDqsibDlyMsb = 0x00000000;
+SDRAM[0].EmcFbioDqsibDly = 0x2f2f2f2f;
+SDRAM[0].EmcFbioQuseDlyMsb = 0x00000000;
+SDRAM[0].EmcFbioQuseDly = 0x2f2f2f2f;
+SDRAM[0].EmcFbioCfg5 = 0x00000083;
+SDRAM[0].EmcFbioCfg6 = 0x00000002;
+SDRAM[0].EmcFbioSpare = 0x00000000;
+SDRAM[0].EmcMrsResetDllWait = 0x00000000;
+SDRAM[0].EmcMrsResetDll = 0x00000000;
+SDRAM[0].EmcMrsDdr2DllReset = 0x00000100;
+SDRAM[0].EmcMrs = 0x00000a5a;
+SDRAM[0].EmcEmrsEmr2 = 0x00200000;
+SDRAM[0].EmcEmrsEmr3 = 0x00300000;
+SDRAM[0].EmcEmrsDdr2DllEnable = 0x00100000;
+SDRAM[0].EmcEmrsDdr2OcdCalib = 0x00100382;
+SDRAM[0].EmcEmrs = 0x00100002;
+SDRAM[0].EmcMrw1 = 0x00000000;
+SDRAM[0].EmcMrw2 = 0x00000000;
+SDRAM[0].EmcMrw3 = 0x00000000;
+SDRAM[0].EmcMrwResetCommand = 0x00000000;
+SDRAM[0].EmcMrwResetNInitWait = 0x00000000;
+SDRAM[0].EmcAdrCfg1 = 0x00070303;
+SDRAM[0].EmcAdrCfg = 0x00070303;
+SDRAM[0].McEmemCfg = 0x00080000;
+SDRAM[0].McLowLatencyConfig = 0x80000003;
+SDRAM[0].EmcCfg2 = 0x00000405;
+SDRAM[0].EmcCfgDigDll = 0x00380006;
+SDRAM[0].EmcCfgClktrim0 = 0x00000000;
+SDRAM[0].EmcCfgClktrim1 = 0x00000000;
+SDRAM[0].EmcCfgClktrim2 = 0x00000000;
+SDRAM[0].EmcCfg = 0x0001ff00;
+SDRAM[0].EmcDbg = 0x01000000;
+SDRAM[0].AhbArbitrationXbarCtrl = 0x00010000;
+SDRAM[0].EmcDllXformDqs = 0x00000010;
+SDRAM[0].EmcDllXformQUse = 0x00000008;
+SDRAM[0].WarmBootWait = 0x00000002;
+SDRAM[0].EmcCttTermCtrl = 0x00000802;
+SDRAM[0].EmcOdtWrite = 0x00000000;
+SDRAM[0].EmcOdtRead = 0x00000000;
+SDRAM[0].EmcZcalRefCnt = 0x00000000;
+SDRAM[0].EmcZcalWaitCnt = 0x00000000;
+SDRAM[0].EmcZcalMrwCmd = 0x00000000;
+SDRAM[0].EmcMrwZqInitDev0 = 0x00000000;
+SDRAM[0].EmcMrwZqInitDev1 = 0x00000000;
+SDRAM[0].EmcMrwZqInitWait = 0x00000000;
+SDRAM[0].EmcDdr2Wait = 0x00000002;
+SDRAM[0].PmcDdrPwr = 0x00000001;
+SDRAM[0].ApbMiscGpXm2CfgAPadCtrl = 0x77ffc000;
+SDRAM[0].ApbMiscGpXm2CfgCPadCtrl2 = 0x08080079;
+SDRAM[0].ApbMiscGpXm2CfgCPadCtrl = 0x77fffff0;
+SDRAM[0].ApbMiscGpXm2CfgDPadCtrl2 = 0x44440009;
+SDRAM[0].ApbMiscGpXm2CfgDPadCtrl = 0x77fffff0;
+SDRAM[0].ApbMiscGpXm2ClkCfgPadCtrl = 0x77ffc000;
+SDRAM[0].ApbMiscGpXm2CompPadCtrl = 0x01f1f008;
+SDRAM[0].ApbMiscGpXm2VttGenPadCtrl = 0x07076600;
diff --git a/tamonten/build.sh b/tamonten/build.sh
new file mode 100755
index 0000000..300859f
--- /dev/null
+++ b/tamonten/build.sh
@@ -0,0 +1,35 @@
+#!/bin/sh
+
+# Copyright (C) 2013 Avionic Design GmbH
+#
+# This software is provided 'as-is', without any express or implied
+# warranty. In no event will the authors be held liable for any damages
+# arising from the use of this software.
+#
+# Permission is granted to anyone to use this software for any purpose,
+# including commercial applications, and to alter it and redistribute it
+# freely, subject to the following restrictions:
+#
+# 1. The origin of this software must not be misrepresented; you must not
+# claim that you wrote the original software. If you use this software
+# in a product, an acknowledgment in the product documentation would be
+# appreciated but is not required.
+# 2. Altered source versions must be plainly marked as such, and must not be
+# misrepresented as being the original software.
+# 3. This notice may not be removed or altered from any source distribution.
+
+set -e
+
+# generate Tegra20 Tamonten BCT
+for cfg in Tamonten_T2_*.cfg; do
+ cbootimage -t20 -gbct $cfg ${cfg%.cfg}.bct
+done
+
+subdirs="$subdirs tegra20-plutux"
+subdirs="$subdirs tegra20-medcom-wide"
+subdirs="$subdirs tegra20-tec"
+
+# descend into board subdirectories
+for subdir in $subdirs; do
+ ( cd $subdir && ./build.sh )
+done
diff --git a/tamonten/tegra20-medcom-wide/build.sh b/tamonten/tegra20-medcom-wide/build.sh
new file mode 100755
index 0000000..025ceed
--- /dev/null
+++ b/tamonten/tegra20-medcom-wide/build.sh
@@ -0,0 +1,23 @@
+#!/bin/sh
+
+# Copyright (C) 2013 Avionic Design GmbH
+#
+# This software is provided 'as-is', without any express or implied
+# warranty. In no event will the authors be held liable for any damages
+# arising from the use of this software.
+#
+# Permission is granted to anyone to use this software for any purpose,
+# including commercial applications, and to alter it and redistribute it
+# freely, subject to the following restrictions:
+#
+# 1. The origin of this software must not be misrepresented; you must not
+# claim that you wrote the original software. If you use this software
+# in a product, an acknowledgment in the product documentation would be
+# appreciated but is not required.
+# 2. Altered source versions must be plainly marked as such, and must not be
+# misrepresented as being the original software.
+# 3. This notice may not be removed or altered from any source distribution.
+
+set -e
+
+cbootimage -t20 tegra20-medcom-wide.cfg tegra20-medcom-wide.img
diff --git a/tamonten/tegra20-medcom-wide/tegra20-medcom-wide.cfg b/tamonten/tegra20-medcom-wide/tegra20-medcom-wide.cfg
new file mode 100644
index 0000000..0976a13
--- /dev/null
+++ b/tamonten/tegra20-medcom-wide/tegra20-medcom-wide.cfg
@@ -0,0 +1,22 @@
+# Copyright (C) 2013 Avionic Design GmbH
+#
+# This software is provided 'as-is', without any express or implied
+# warranty. In no event will the authors be held liable for any damages
+# arising from the use of this software.
+#
+# Permission is granted to anyone to use this software for any purpose,
+# including commercial applications, and to alter it and redistribute it
+# freely, subject to the following restrictions:
+#
+# 1. The origin of this software must not be misrepresented; you must not
+# claim that you wrote the original software. If you use this software
+# in a product, an acknowledgment in the product documentation would be
+# appreciated but is not required.
+# 2. Altered source versions must be plainly marked as such, and must not be
+# misrepresented as being the original software.
+# 3. This notice may not be removed or altered from any source distribution.
+
+Version = 0x00020001;
+Bctcopy = 1;
+Bctfile = ../Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.bct;
+BootLoader = u-boot.bin,0x00108000,0x00108000,Complete;
diff --git a/tamonten/tegra20-plutux/build.sh b/tamonten/tegra20-plutux/build.sh
new file mode 100755
index 0000000..e1ce9a7
--- /dev/null
+++ b/tamonten/tegra20-plutux/build.sh
@@ -0,0 +1,23 @@
+#!/bin/sh
+
+# Copyright (C) 2013 Avionic Design GmbH
+#
+# This software is provided 'as-is', without any express or implied
+# warranty. In no event will the authors be held liable for any damages
+# arising from the use of this software.
+#
+# Permission is granted to anyone to use this software for any purpose,
+# including commercial applications, and to alter it and redistribute it
+# freely, subject to the following restrictions:
+#
+# 1. The origin of this software must not be misrepresented; you must not
+# claim that you wrote the original software. If you use this software
+# in a product, an acknowledgment in the product documentation would be
+# appreciated but is not required.
+# 2. Altered source versions must be plainly marked as such, and must not be
+# misrepresented as being the original software.
+# 3. This notice may not be removed or altered from any source distribution.
+
+set -e
+
+cbootimage -t20 tegra20-plutux.cfg tegra20-plutux.img
diff --git a/tamonten/tegra20-plutux/tegra20-plutux.cfg b/tamonten/tegra20-plutux/tegra20-plutux.cfg
new file mode 100644
index 0000000..0976a13
--- /dev/null
+++ b/tamonten/tegra20-plutux/tegra20-plutux.cfg
@@ -0,0 +1,22 @@
+# Copyright (C) 2013 Avionic Design GmbH
+#
+# This software is provided 'as-is', without any express or implied
+# warranty. In no event will the authors be held liable for any damages
+# arising from the use of this software.
+#
+# Permission is granted to anyone to use this software for any purpose,
+# including commercial applications, and to alter it and redistribute it
+# freely, subject to the following restrictions:
+#
+# 1. The origin of this software must not be misrepresented; you must not
+# claim that you wrote the original software. If you use this software
+# in a product, an acknowledgment in the product documentation would be
+# appreciated but is not required.
+# 2. Altered source versions must be plainly marked as such, and must not be
+# misrepresented as being the original software.
+# 3. This notice may not be removed or altered from any source distribution.
+
+Version = 0x00020001;
+Bctcopy = 1;
+Bctfile = ../Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.bct;
+BootLoader = u-boot.bin,0x00108000,0x00108000,Complete;
diff --git a/tamonten/tegra20-tec/build.sh b/tamonten/tegra20-tec/build.sh
new file mode 100755
index 0000000..a523b46
--- /dev/null
+++ b/tamonten/tegra20-tec/build.sh
@@ -0,0 +1,23 @@
+#!/bin/sh
+
+# Copyright (C) 2013 Avionic Design GmbH
+#
+# This software is provided 'as-is', without any express or implied
+# warranty. In no event will the authors be held liable for any damages
+# arising from the use of this software.
+#
+# Permission is granted to anyone to use this software for any purpose,
+# including commercial applications, and to alter it and redistribute it
+# freely, subject to the following restrictions:
+#
+# 1. The origin of this software must not be misrepresented; you must not
+# claim that you wrote the original software. If you use this software
+# in a product, an acknowledgment in the product documentation would be
+# appreciated but is not required.
+# 2. Altered source versions must be plainly marked as such, and must not be
+# misrepresented as being the original software.
+# 3. This notice may not be removed or altered from any source distribution.
+
+set -e
+
+cbootimage -t20 tegra20-tec.cfg tegra20-tec.img
diff --git a/tamonten/tegra20-tec/tegra20-tec.cfg b/tamonten/tegra20-tec/tegra20-tec.cfg
new file mode 100644
index 0000000..0976a13
--- /dev/null
+++ b/tamonten/tegra20-tec/tegra20-tec.cfg
@@ -0,0 +1,22 @@
+# Copyright (C) 2013 Avionic Design GmbH
+#
+# This software is provided 'as-is', without any express or implied
+# warranty. In no event will the authors be held liable for any damages
+# arising from the use of this software.
+#
+# Permission is granted to anyone to use this software for any purpose,
+# including commercial applications, and to alter it and redistribute it
+# freely, subject to the following restrictions:
+#
+# 1. The origin of this software must not be misrepresented; you must not
+# claim that you wrote the original software. If you use this software
+# in a product, an acknowledgment in the product documentation would be
+# appreciated but is not required.
+# 2. Altered source versions must be plainly marked as such, and must not be
+# misrepresented as being the original software.
+# 3. This notice may not be removed or altered from any source distribution.
+
+Version = 0x00020001;
+Bctcopy = 1;
+Bctfile = ../Tamonten_T2_512MB_MEM2G16D2D-ABG-25_366MHz.bct;
+BootLoader = u-boot.bin,0x00108000,0x00108000,Complete;
--
1.8.2
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
