On 04/02/2013 05:20 AM, Joseph Lo wrote: > This patch adds "non-removable" property of MMC host where the eMMC device > is for Tegra platform. > > And the "keep-power-in-suspend" property was used for the SDIO device that > need this to go into suspend mode (e.g. BRCM43xx series). > arch/arm/boot/dts/tegra20-paz00.dts | 1 + > arch/arm/boot/dts/tegra20-seaboard.dts | 2 ++ > arch/arm/boot/dts/tegra20-ventana.dts | 2 ++ > arch/arm/boot/dts/tegra20-whistler.dts | 1 + > arch/arm/boot/dts/tegra30-beaver.dts | 1 + > arch/arm/boot/dts/tegra30-cardhu-a02.dts | 1 + > arch/arm/boot/dts/tegra30-cardhu-a04.dts | 1 + > arch/arm/boot/dts/tegra30-cardhu.dtsi | 1 + I think there are a bunch of other boards that need a similar change, right? There are certainly eMMC devices on other boards, and shouldn't they be marked with non-removable? In particular, Beaver, Dalmore, and Pluto, and likely some/all of the Colibri and Avionic Design boards. I think it should be obvious which SDHCI devices need this, since there won't be any cd-gpios property and the bus-width will likely be 8. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
