On 03/20/2013 06:20 AM, Felipe Balbi wrote: > Hi, > > On Tue, Mar 19, 2013 at 10:29:05AM -0600, Stephen Warren wrote: >> I see the following Kconfig warnings in next-20130319: >> >>> warning: (ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC) selects >>> USB_ULPI which has unmet direct dependencies (USB_SUPPORT && >>> USB_PHY && ARM) warning: (ARCH_TEGRA_2x_SOC && >>> ARCH_TEGRA_3x_SOC) selects USB_ULPI_VIEWPORT which has unmet >>> direct dependencies (USB_SUPPORT && USB_PHY && USB_ULPI) >>> include/config/auto.conf:624:warning: override: >>> ARCH_MULTIPLATFORM changes choice state warning: >>> (ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC) selects USB_ULPI which >>> has unmet direct dependencies (USB_SUPPORT && USB_PHY && ARM) >>> warning: (ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC) selects >>> USB_ULPI_VIEWPORT which has unmet direct dependencies >>> (USB_SUPPORT && USB_PHY && USB_ULPI) >> >> Which I believe are the cause of the following build errors: >> >>> drivers/built-in.o: In function `controller_resume': >>> drivers/usb/host/ehci-tegra.c:556: undefined reference to >>> `tegra_usb_phy_preresume' drivers/usb/host/ehci-tegra.c:479: >>> undefined reference to `tegra_ehci_phy_restore_start' >>> drivers/usb/host/ehci-tegra.c:551: undefined reference to >>> `tegra_ehci_phy_restore_end' drivers/usb/host/ehci-tegra.c:546: >>> undefined reference to `tegra_ehci_phy_restore_end' >>> drivers/built-in.o: In function `tegra_ehci_probe': >>> drivers/usb/host/ehci-tegra.c:734: undefined reference to >>> `tegra_usb_phy_open' drivers/built-in.o: In function >>> `tegra_ehci_hub_control': drivers/usb/host/ehci-tegra.c:162: >>> undefined reference to `tegra_usb_phy_postresume' >>> drivers/usb/host/ehci-tegra.c:215: undefined reference to >>> `tegra_usb_phy_preresume' make: *** [vmlinux] Error 1 >> >> I pointed out at least the Kconfig problems when you posted the >> PHY error handling cleanup series, so I'm not sure why those >> patches were applied. > > Because tegra EHCI shouldn't be selecting the PHY and you didn't > even have a proper PHY driver. Try patch below: I understand that, but applying the patches without that resolved still seems wrong. Just because something is currently sub-optimal doesn't mean it should get broken. The patch you gave fixes the Kconfig warnings, but not the build failure. The issue is that: tegra_defconfig enables CONFIG_USB_EHCI_TEGRA, but not CONFIG_USB_PHY since it's new. ehci-tegra.c directly calls functions exported by phy-tegra-usb.c. However, phy-tegra-usb.c doesn't get built, since drivers/usb/Makefile adds phy/ to obj-$(CONFIG_USB_PHY), so doesn't end up "recursing" into the sub-directory at all. drivers/usb/phy/Makefile contains: obj-$(CONFIG_USB_EHCI_TEGRA)+= phy-tegra-usb.o which used to couple the two builds together, in the absence of this new change that limits the building of phy/. For now, I think the correct solution is to have USB_EHCI_TEGRA select USB_PHY. I validated that solves the build problem, and has the bonus of not needing any changes to tegra_defconfig. In the series that converts phy-usb-tegra.c to a real driver, we can give it its own Kconfig option, and have USB_EHCI_TEGRA depend on that, if you want. We'll then also need to take a patch through the Tegra tree to update tegra_defconfig. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
