On Wed, 13 Feb 2013 14:33:10 -0700, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote: > From: Stephen Warren <swarren@xxxxxxxxxx> > > Many GPIO device tree bindings use the same flags. Create a header to > define those. > > Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx> > --- > arch/arm/boot/dts/gpio.h | 10 ++++++++++ > 1 file changed, 10 insertions(+) > create mode 100644 arch/arm/boot/dts/gpio.h > > diff --git a/arch/arm/boot/dts/gpio.h b/arch/arm/boot/dts/gpio.h > new file mode 100644 > index 0000000..4c9da69 > --- /dev/null > +++ b/arch/arm/boot/dts/gpio.h Stephen, you know better than this. This is common code. Don't put it under arch/arm. g. > @@ -0,0 +1,10 @@ > +/* > + * This header provides constants for most GPIO bindings. > + * > + * Most GPIO bindings include a flags cell as part of the GPIO specifier. > + * In most cases, the format of the flags cell uses the standard values > + * defined in this header. > + */ > + > +#define GPIO_ACTIVE_HIGH 0 > +#define GPIO_ACTIVE_LOW 1 > -- > 1.7.10.4 > -- Grant Likely, B.Sc, P.Eng. Secret Lab Technologies, Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
