On Mon, Feb 18, 2013 at 07:30:25PM +0800, Wei Ni wrote:
> Add support to handle irq. When the temperature touch the limit value, the
> driver can handle the interrupt.
>
> Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
> Signed-off-by: Wei Ni <wni@xxxxxxxxxx>
> ---
> drivers/hwmon/lm90.c | 38 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
>
> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
> index caf01b0..80311ef 100644
> --- a/drivers/hwmon/lm90.c
> +++ b/drivers/hwmon/lm90.c
> @@ -89,6 +89,8 @@
> #include <linux/err.h>
> #include <linux/mutex.h>
> #include <linux/sysfs.h>
> +#include <linux/interrupt.h>
> +#include <linux/of_irq.h>
>
> /*
> * Addresses to scan
> @@ -302,6 +304,7 @@ static const struct lm90_params lm90_params[] = {
> struct lm90_data {
> struct device *hwmon_dev;
> struct mutex update_lock;
> + struct work_struct irq_work;
> char valid; /* zero until following fields are valid */
> unsigned long last_updated; /* in jiffies */
> int kind;
> @@ -1418,6 +1421,29 @@ static void lm90_init_client(struct i2c_client *client)
> i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
> }
>
> +static void lm90_alert(struct i2c_client *client, unsigned int flag);
> +
> +static void lm90_irq_work(struct work_struct *work)
> +{
> + struct lm90_data *data = container_of(work, struct lm90_data,
> + irq_work);
> + struct i2c_client *client = to_i2c_client(data->hwmon_dev->parent);
> +
> + lm90_alert(client, 0);
> +
> + enable_irq(client->irq);
> +}
> +
> +static irqreturn_t lm90_irq(int irq, void *dev_id)
> +{
> + struct lm90_data *data = dev_id;
> +
> + disable_irq_nosync(irq);
> + schedule_work(&data->irq_work);
> +
> + return IRQ_HANDLED;
> +}
> +
> static int lm90_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -1494,6 +1520,17 @@ static int lm90_probe(struct i2c_client *client,
> goto exit_remove_files;
> }
>
> + if (client->irq >= 0) {
> + INIT_WORK(&data->irq_work, lm90_irq_work);
> + dev_dbg(dev, "lm90 irq: %d\n", client->irq);
> + err = request_irq(client->irq, lm90_irq, IRQF_TRIGGER_LOW,
> + "lm90", data);
request_threaded_irq or even better devm_request_threaded_irq would be better here.
> + if (err < 0) {
> + dev_err(dev, "cannot request interrupt\n");
> + goto exit_remove_files;
> + }
> + }
> +
> return 0;
>
> exit_remove_files:
> @@ -1507,6 +1544,7 @@ static int lm90_remove(struct i2c_client *client)
> {
> struct lm90_data *data = i2c_get_clientdata(client);
>
> + free_irq(client->irq, data);
> hwmon_device_unregister(data->hwmon_dev);
> lm90_remove_files(client, data);
> lm90_restore_conf(client, data);
> --
> 1.7.9.5
>
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@xxxxxxxxxxxxxx
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
