On 01/17/2013 04:59 AM, Lucas Stach wrote:
> This adds the device tree for the Toradex Iris carrier board used
> together with a Colibri T20 512MB COM.
> diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts
> + board_regulators {
Similarly, name that node just regulators
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
Those properties will then already exist, so no need to duplicate them here.
> + usb_host_vbus {
That would be regulator@3
> + compatible = "regulator-fixed";
> + reg = <0>;
That reg = <3>;
(or start numbering the board entries at say 100 to leave room for
changes in the COM include file)
> + regulator-name = "usb_host_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + gpio = <&gpio 178 0>;
> + };
> +
> + vcc_sd_reg: regulator@3 {
> + compatible = "regulator-fixed";
> + reg = <1>;
And the node name and reg property here would be 4.
> + regulator-name = "vcc_sd";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + };
> +};
Oh and in patch 1, I noticed spaces after < or before >; could you
remove those while you're at it. Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
