The flag parameter is added in the cyclic transfer request.
Use the flag option of:
- DMA_PREP_INTERRUPT for enabling interrupt.
- DMA_CTRL_ACK for deciding whether ack is requred or not for
descriptor.
Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
---
Vinod,
This patch was sent before holiday and may be it is missed in you radar.
You have already applied my other patches on dma which was sent later so
resending this patch.
Stephen wanted this to be part of stable branch also.
This is against bug fixes and new feature added in K3.7 for cyclic transfer without
interrupt.
drivers/dma/tegra20-apb-dma.c | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index efdfffa..bf58bb8 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -266,6 +266,7 @@ static struct tegra_dma_desc *tegra_dma_desc_get(
if (async_tx_test_ack(&dma_desc->txd)) {
list_del(&dma_desc->node);
spin_unlock_irqrestore(&tdc->lock, flags);
+ dma_desc->txd.flags = 0;
return dma_desc;
}
}
@@ -1050,7 +1051,9 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
TEGRA_APBDMA_AHBSEQ_WRAP_SHIFT;
ahb_seq |= TEGRA_APBDMA_AHBSEQ_BUS_WIDTH_32;
- csr |= TEGRA_APBDMA_CSR_FLOW | TEGRA_APBDMA_CSR_IE_EOC;
+ csr |= TEGRA_APBDMA_CSR_FLOW;
+ if (flags & DMA_PREP_INTERRUPT)
+ csr |= TEGRA_APBDMA_CSR_IE_EOC;
csr |= tdc->dma_sconfig.slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
apb_seq |= TEGRA_APBDMA_APBSEQ_WRAP_WORD_1;
@@ -1095,7 +1098,8 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
mem += len;
}
sg_req->last_sg = true;
- dma_desc->txd.flags = 0;
+ if (flags & DMA_CTRL_ACK)
+ dma_desc->txd.flags = DMA_CTRL_ACK;
/*
* Make sure that mode should not be conflicting with currently
--
1.7.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
