On 11/13/2012 05:54 PM, Thierry Reding wrote:
> * PGP Signed by an unknown key
>
> On Tue, Nov 13, 2012 at 05:49:28PM +0800, Mark Zhang wrote:
>> On 11/13/2012 05:37 PM, Thierry Reding wrote:
>>>> Old Signed by an unknown key
>>>
>>> On Tue, Nov 13, 2012 at 04:49:24PM +0800, Mark Zhang wrote:
>>>> On 11/13/2012 03:48 PM, Thierry Reding wrote:
>>>>>> Old Signed by an unknown key
>>>>>
>>>>> On Tue, Nov 13, 2012 at 03:15:47PM +0800, Mark Zhang wrote:
>>>>>> On 11/13/2012 05:55 AM, Thierry Reding wrote:
>>>>>>> This commit adds a KMS driver for the Tegra20 SoC. This includes basic
>>>>>>> support for host1x and the two display controllers found on the Tegra20
>>>>>>> SoC. Each display controller can drive a separate RGB/LVDS output.
>>>>>>>
>>>>>>> Signed-off-by: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
>>>>>>> ---
>>>>>>> Changes in v2:
>>>>>>> - drop Linux-specific drm subdirectory for DT bindings documentation
>>>>>>> - remove display helper leftovers that belong in a later patch
>>>>>>> - reuse debugfs infrastructure provided by the DRM core
>>>>>>> - move vblank syncpoint defines to dc.h
>>>>>>> - use drm_compat_ioctl()
>>>>>>>
>>>>>> [...]
>>>>>>> diff --git a/drivers/gpu/drm/tegra/Kconfig b/drivers/gpu/drm/tegra/Kconfig
>>>>>>> new file mode 100644
>>>>>>> index 0000000..be1daf7
>>>>>>> --- /dev/null
>>>>>>> +++ b/drivers/gpu/drm/tegra/Kconfig
>>>>>>> @@ -0,0 +1,23 @@
>>>>>>> +config DRM_TEGRA
>>>>>>> + tristate "NVIDIA Tegra DRM"
>>>>>>> + depends on DRM && OF && ARCH_TEGRA
>>>>>>> + select DRM_KMS_HELPER
>>>>>>> + select DRM_GEM_CMA_HELPER
>>>>>>> + select DRM_KMS_CMA_HELPER
>>>>>>
>>>>>> Just for curious, according to my testing, why the "CONFIG_CMA" is not
>>>>>> enabled while DRM_GEM_CMA_HELPER & DRM_KMS_CMA_HELPER are enabled here?
>>>>>
>>>>> The reason is that CMA doesn't actually provide any API for drivers to
>>>>> use and in fact unless you use very large buffers you could indeed run
>>>>> this code on top of a non-CMA kernel and it will likely even work.
>>>>>
>>>>
>>>> Okay. But I think it's better to turn on CMA defaultly. During my
>>>> testing, it's hard to allocate more 2MB without CMA...
>>>
>>> CMA is enabled by default in one of the Tegra default configuration
>>> patches in my tegra/next branch. I will submit that patch to Stephen
>>> when the 3.8 cycle starts, so that it'll be automatically enabled along
>>> with the DRM driver.
>>>
>>> But I don't think it makes sense to couple it to the DRM_TEGRA symbol as
>>> it isn't strictly required.
>>>
>>
>> Yes. We don't need to touch CMA in our Kconfig. In my opinion, right now
>> we're relying on the DRM_GEM_CMA_HELPER which should turn on CMA when
>> it's been selected.
>
> Again, I don't think CMA should be selected by those either as the
> helpers will work fine if CMA is disabled (their name is a bit
> unfortunate). It's just that they won't be able to allocate very large
> buffers.
>
> So I think the correct way is to select CMA in the Tegra default
> configuration to make it explicit that Tegra wants to use the CMA for
> large contiguous buffer allocations.
>
Agree.
>>>>>>> +static struct of_device_id tegra_dc_of_match[] = {
>>>>>>> + { .compatible = "nvidia,tegra20-dc", },
>>>>>>> + { .compatible = "nvidia,tegra30-dc", },
>>>>>>
>>>>>> If you don't want add Tegra 3 support in this patch set, remove
>>>>>> { .compatible = "nvidia,tegra30-dc", } here.
>>>>>
>>>>> Good catch! I'll move that into the Tegra30 support patch.
>>>>>
>>>>>>> +static int host1x_activate_drm_client(struct host1x *host1x,
>>>>>>> + struct host1x_drm_client *drm,
>>>>>>> + struct host1x_client *client)
>>>>>>> +{
>>>>>>> + mutex_lock(&host1x->drm_clients_lock);
>>>>>>> + list_del_init(&drm->list);
>>>>>>> + list_add_tail(&drm->list, &host1x->drm_active);
>>>>>>
>>>>>> Why we need this "drm_active" list? We can combine this function and
>>>>>> function "host1x_remove_drm_client" and free the drm client just here.
>>>>>> It's useless after host1x clients registered themselves.
>>>>>
>>>>> The list is used to properly remove all clients and resources when the
>>>>> module is unloaded. Granted, this code isn't executed if you don't build
>>>>> the driver as a loadable module, but it should still be a supported use-
>>>>> case.
>>>>>
>>>>
>>>> My opinion is, after registration is completed, host1x_drm_client is
>>>> useless, host1x_client is enough for follow-up operations.
>>>> I still don't get how this is related with building the driver into the
>>>> kernel or as a kernel module, so if something I misunderstood, please
>>>> let me know it. Thanks.
>>>
>>> I can take another look at this and see if it can be further simplified.
>>> This was actually a rather tricky part to get right, so I'm naturally a
>>> bit hesitant to touch it.
>>>
>>
>> Okay. I recall I did some changes on this part about 3 month ago in a
>> patch named "drm: Add T30 support - host1x". So maybe you can know what
>> I mean by reading that patch.
>
> Yes, I remember the patch. Unfortunately the result of applying that
> patch was that unloading the module no longer worked properly.
>
Okay. I'll take a look at this part as well when I'm free.
> Thierry
>
> * Unknown Key
> * 0x7F3EB3A1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
