This series modify the dts file to add the slink addresses, make AUXDATA in board dt files, enable slink4 for tegra30-cardhu and enable slink controller defconfig. Changes from V1: - Remove changes from clock tables. - Make the dma req dt property name to nvidia,dma-request-selector. - change the spi max frequency prop to spi-max-frequency. Changes from V2: - make node name to spi. - get rid of iomap.h. Changes from V3: - Enable spi flash connected on slink4-cs1. - Enable require defconfigs. Laxman Dewangan (4): ARM: tegra: dts: add slink controller dt entry ARM: tegra: Add OF_DEV_AUXDATA for SLINK driver in board dt ARM: tegra: dts: cardhu: enable SLINK4 ARM: tegra: config: enable spi driver for Tegra SLINK controller .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/tegra20.dtsi | 41 +++++++++++++ arch/arm/boot/dts/tegra30-cardhu.dtsi | 10 +++ arch/arm/boot/dts/tegra30.dtsi | 60 ++++++++++++++++++++ arch/arm/configs/tegra_defconfig | 5 +- arch/arm/mach-tegra/board-dt-tegra20.c | 8 +++ arch/arm/mach-tegra/board-dt-tegra30.c | 12 ++++ 7 files changed, 136 insertions(+), 1 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
