On 10/26/2012 12:49 PM, Laxman Dewangan wrote:
> Thanks Stephen for review.
> I have taken care of almost all feedback. Some of having my below comments.
>
> On Tuesday 23 October 2012 01:32 AM, Stephen Warren wrote:
>> On 10/18/2012 04:47 AM, Laxman Dewangan wrote:
>>> Tegra20/Tegra30 supports the spi interface through its SLINK
>>> controller. Add spi driver for SLINK controller.
>>> + val_write = SLINK_RDY;
>>> + val_write |= (val& SLINK_FIFO_ERROR);
>> Why not just always set SLINK_FIFO_ERROR; does it have to be set in the
>> write only if the status was previously asserted? If that is true, how
>> do you avoid a race condition where the bit gets set in SLINK_STATUS
>> after you read it but before you write to clear it?
>
> Status gets updated together. There is no steps of updating status.
Sorry, I don't understand this answer.
>>> + spin_lock_irqsave(&tspi->lock, flags);
>>> + if (err) {
>>> + dev_err(tspi->dev,
>>> + "DmaXfer: ERROR bit set 0x%x\n",
>>> tspi->status_reg);
>>> + dev_err(tspi->dev,
>>> + "DmaXfer 0x%08x:0x%08x:0x%08x\n",
>>> tspi->command_reg,
>>> + tspi->command2_reg,
>>> tspi->dma_control_reg);
>>> + tegra_periph_reset_assert(tspi->clk);
>>> + udelay(2);
>>> + tegra_periph_reset_deassert(tspi->clk);
>> Do we /have/ to reset the SPI block; can't we just disable it in the
>> control register, clear all status, and re-program it from scratch?
>>
>> If at all possible, I would like to avoid introducing any new use of
>> tegra_periph_reset_{,de}assert, since that API has no standard subsystem
>> equivalent (or if it does, isn't hooked into the standard subsystem
>> yet), and hence means this driver relies on a header file currently in
>> arch/arm/mach-tegra/include/mach, and we need to move or delete all such
>> headers in order to support single zImage.
>
> Is there a way to support the reset of controller. We will need this
> functionality.
Why do we need to reset the controller at all; can't we simply program
all the (few) configuration registers? Are there HW bugs that hang the
controller and require a reset or something?
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
