The Medcom is a 16:9 15" terminal that is used for patient infotainment
in hospitals.
Signed-off-by: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
---
Changes in v4:
- based on tegra20-tamonten.dtsi
- rename compatible of sound property to match device
- rename DTS file to match device name
arch/arm/boot/dts/tegra20-medcom-wide.dts | 60 +++++++++++++++++++++++++++++++
arch/arm/mach-tegra/Makefile.boot | 1 +
2 files changed, 61 insertions(+)
create mode 100644 arch/arm/boot/dts/tegra20-medcom-wide.dts
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
new file mode 100644
index 0000000..d2ff5ab
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -0,0 +1,60 @@
+/dts-v1/;
+
+/include/ "tegra20-tamonten.dtsi"
+
+/ {
+ model = "Avionic Design Medcom-Wide board";
+ compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
+
+ i2c@7000c000 {
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <187 0x04>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = <0xffffffff
+ 0xffffffff
+ 0
+ 0xffffffff
+ 0xffffffff>;
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 5000000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
+ sound {
+ compatible = "ad,tegra-audio-wm8903-medcom-wide",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "Avionic Design Medcom-Wide";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
+ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
+ };
+};
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index 63f1d61..020548a 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -3,6 +3,7 @@ params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100
initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-medcom-wide.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-plutux.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb
--
1.7.12
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
