Quoting Prashant Gaikwad (2012-09-11 04:39:18) > On Tuesday 11 September 2012 11:13 AM, Stephen Warren wrote: > > On 09/10/2012 10:45 PM, Mike Turquette wrote: > > Quoting Stephen Warren (2012-09-10 16:12:38) > > From: Stephen Warren <swarren@xxxxxxxxxx> > > When changing a PLL's rate, it must have no active children. The CPU > clock cannot be stopped, and CPU clock's divider is not used. The old > clock driver used to handle this by internally reparenting the CPU clock > onto a different PLL when changing the CPU clock rate. However, the new > common-clock based clock driver does not do this, and probably cannot do > this due to the locking issues it would cause. > > > This is possible today. Clock drivers can call __clk_reparent to update > the common clk bookkeeping to reflect changes in parent muxing. There > are some examples of this out in the wild, and the unmerged OMAP port > certainly uses this during the PLL relock sequence. > > The CPU clock's set_rate needs to both __clk_reparent() /and/ set the > rate of the parent PLL. I think a (non-static) __clk_set_rate() is > missing? (although perhaps that could be easily solved if desired). > > > To solve this, have the Tegra cpufreq driver explicitly perform the > reparenting operations itself. This is probably reasonable anyway, > since such reparenting is somewhat a matter of policy (e.g. which > alternate clock source to use, whether to leave the CPU clock a child > of the alternate clock source if it's running at the desired rate), > and hence is something more appropriate for the cpufreq driver than > the core clock driver anyway. > > I definitely agree about the policy. Just FYI I'm hacking on an RFC to > make reparenting clocks from a call to clk_set_rate even easier, but > perhaps in your case it is better the cpufreq driver knows the clock > tree topology details. > > OK, sounds fine to me:-) > > > Policies can change for Tegra20 and Tegra30. IMO we should implement it in clock driver. > But it can not be done unless there is a way to call clk_set_rate from clk ops. OMAP 4460/4470 have a similar constraint to have reparenting operation depending on the frequency that the ARM runs at. I'll try to implement this soon and I will Cc you guys on it. Hopefully the same method makes sense for you. Regards, Mike -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
