Re: [PATCH 1/1] driver-core: Shut up dev_dbg_reatelimited() without DEBUG

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Antti,

Antti Palosaari <crope@xxxxxx> wrote @ Sat, 18 Aug 2012 02:11:56 +0200:

> On 08/17/2012 09:04 AM, Hiroshi Doyu wrote:
> > dev_dbg_reatelimited() without DEBUG printed "217078 callbacks
> > suppressed". This shouldn't print anything without DEBUG.
> >
> > Signed-off-by: Hiroshi Doyu <hdoyu@xxxxxxxxxx>
> > Reported-by: Antti Palosaari <crope@xxxxxx>
> > ---
> >   include/linux/device.h |    6 +++++-
> >   1 files changed, 5 insertions(+), 1 deletions(-)
> >
> > diff --git a/include/linux/device.h b/include/linux/device.h
> > index eb945e1..d4dc26e 100644
> > --- a/include/linux/device.h
> > +++ b/include/linux/device.h
> > @@ -962,9 +962,13 @@ do {									\
> >   	dev_level_ratelimited(dev_notice, dev, fmt, ##__VA_ARGS__)
> >   #define dev_info_ratelimited(dev, fmt, ...)				\
> >   	dev_level_ratelimited(dev_info, dev, fmt, ##__VA_ARGS__)
> > +#if defined(DEBUG)
> >   #define dev_dbg_ratelimited(dev, fmt, ...)				\
> >   	dev_level_ratelimited(dev_dbg, dev, fmt, ##__VA_ARGS__)
> > -
> > +#else
> > +#define dev_dbg_ratelimited(dev, fmt, ...)			\
> > +	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
> > +#endif
> >   /*
> >    * Stupid hackaround for existing uses of non-printk uses dev_info
> >    *
> >
>
> NACK. I don't think that's correct behavior. After that patch it kills
> all output of dev_dbg_ratelimited(). If I use dynamic debugs and order
> debugs, I expect to see debugs as earlier.

You are right. I attached the update patch, just moving *_ratelimited
functions after dev_dbg() definitions.

With DEBUG defined/undefined in your "test.ko", it works fine. With
CONFIG_DYNAMIC_DEBUG, it works with "+p", but with "-p", still
"..callbacks suppressed" is printed.

$ insmod test.ko
$ echo -n 'module test +p' > /sys/kernel/debug/dynamic_debug/control"
$ rmmod test
$ dmesg | tail -15
<7>[   69.047192] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
<7>[   69.047233] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
<7>[   69.047275] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
<4>[   75.057045] print_dev_dbg_ratelimited: 90 callbacks suppressed
<7>[   75.063595] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
<7>[   75.063796] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
<7>[   75.063970] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
<7>[   75.064137] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
<7>[   75.064307] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
<7>[   75.064472] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
<7>[   75.064640] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
<7>[   75.064806] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
<7>[   75.064972] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
<7>[   75.065137] (NULL device *): print_dev_dbg_ratelimited: dev_dbg_ratelimited()
<6>[   75.065510] test module unloaded!

$ insmod test.ko
$ echo -n 'module test -p' > /sys/kernel/debug/dynamic_debug/control"
$ rmmod test
$ dmesg
...
<6>[   82.715925] test module loaded!
<6>[   82.795642] dynamic_debug:ddebug_exec_queries: processed 1 queries, with 1 matches, 0 errs
<4>[   88.892096] print_dev_dbg_ratelimited: 90 callbacks suppressed
<6>[   88.898397] test module unloaded!

Any suggestion to control "... callbacks suppressed" with
CONFIG_DYNAMIC_DEBUG would be appreciated.

>From 5b33751f89c2e91ee734325e6d73ed7e1c6d4b02 Mon Sep 17 00:00:00 2001
From: Hiroshi Doyu <hdoyu@xxxxxxxxxx>
Date: Mon, 20 Aug 2012 13:49:19 +0300
Subject: [PATCH 1/1] driver-core: Shut up dev_dbg_reatelimited() without
 DEBUG

dev_dbg_reatelimited() without DEBUG printed "217078 callbacks
suppressed". This shouldn't print anything without DEBUG.

With CONFIG_DYNAMIC_DEBUG, the print should be configured as expected.

Signed-off-by: Hiroshi Doyu <hdoyu@xxxxxxxxxx>
Reported-by: Antti Palosaari <crope@xxxxxx>
---
 include/linux/device.h |   53 ++++++++++++++++++++++++++---------------------
 1 files changed, 29 insertions(+), 24 deletions(-)

diff --git a/include/linux/device.h b/include/linux/device.h
index 9648331..763bca4 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -932,6 +932,32 @@ int _dev_info(const struct device *dev, const char *fmt, ...)
 
 #endif
 
+/*
+ * Stupid hackaround for existing uses of non-printk uses dev_info
+ *
+ * Note that the definition of dev_info below is actually _dev_info
+ * and a macro is used to avoid redefining dev_info
+ */
+
+#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)
+
+#if defined(CONFIG_DYNAMIC_DEBUG)
+#define dev_dbg(dev, format, ...)		     \
+do {						     \
+	dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
+} while (0)
+#elif defined(DEBUG)
+#define dev_dbg(dev, format, arg...)		\
+	dev_printk(KERN_DEBUG, dev, format, ##arg)
+#else
+#define dev_dbg(dev, format, arg...)				\
+({								\
+	if (0)							\
+		dev_printk(KERN_DEBUG, dev, format, ##arg);	\
+	0;							\
+})
+#endif
+
 #define dev_level_ratelimited(dev_level, dev, fmt, ...)			\
 do {									\
 	static DEFINE_RATELIMIT_STATE(_rs,				\
@@ -955,33 +981,12 @@ do {									\
 	dev_level_ratelimited(dev_notice, dev, fmt, ##__VA_ARGS__)
 #define dev_info_ratelimited(dev, fmt, ...)				\
 	dev_level_ratelimited(dev_info, dev, fmt, ##__VA_ARGS__)
+#if defined(CONFIG_DYNAMIC_DEBUG) || defined(DEBUG)
 #define dev_dbg_ratelimited(dev, fmt, ...)				\
 	dev_level_ratelimited(dev_dbg, dev, fmt, ##__VA_ARGS__)
-
-/*
- * Stupid hackaround for existing uses of non-printk uses dev_info
- *
- * Note that the definition of dev_info below is actually _dev_info
- * and a macro is used to avoid redefining dev_info
- */
-
-#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)
-
-#if defined(CONFIG_DYNAMIC_DEBUG)
-#define dev_dbg(dev, format, ...)		     \
-do {						     \
-	dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
-} while (0)
-#elif defined(DEBUG)
-#define dev_dbg(dev, format, arg...)		\
-	dev_printk(KERN_DEBUG, dev, format, ##arg)
 #else
-#define dev_dbg(dev, format, arg...)				\
-({								\
-	if (0)							\
-		dev_printk(KERN_DEBUG, dev, format, ##arg);	\
-	0;							\
-})
+#define dev_dbg_ratelimited(dev, fmt, ...)			\
+	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
 #endif
 
 #ifdef VERBOSE_DEBUG
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux