Re: [PATCH v4 3/3] tegra: add pwm backlight device tree nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/16/2012 12:08 AM, Alexandre Courbot wrote:

> +++ b/arch/arm/boot/dts/tegra20-ventana.dts

> +	backlight_reg: fixedregulator@176 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "backlight_regulator";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		gpio = <&gpio 176 0>;
> +		startup-delay-us = <0>;
> +		enable-active-high;
> +		regulator-boot-off;
> +	};

Rather than add that as a separate node at the top-level, I think just
add another sub-node to the "regulators" node. Oh, in fact it's already
there in next-20120816; you just need to add a label.

> +++ b/arch/arm/boot/dts/tegra20.dtsi

> -	pwm {
> +	pwm: pwm {
>  		compatible = "nvidia,tegra20-pwm";
>  		reg = <0x7000a000 0x100>;

It's pretty trivial I know, but I'd almost be tempted to make that a
separate patch so that it could be cherry-picked somewhere without a
tegra20-ventana.dts. But, perhaps that's silly.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux