Hi Stephen, On Thu, 2012-08-16 at 00:05 +0800, Stephen Warren wrote: > On 08/15/2012 03:22 AM, Joseph Lo wrote: > > This patch set adds CPU hotplug support for Tegra20 and Tegra30 SoCs. > > > > The first 3 patches make the CPU clock and reset control be a module and > > the abstraction APIs for TegraXX SoCs. And clean up some codes for later > > usage. Then add CPU hotplug support for Tegra20 and Tegra30. > > > > Verified on Seaboard(Tegra20) and Cardhu(Tegra30) > > > > V2: > > * add one more patch for enable HOTPLUG_CPU [6/6] > > The build problem when HOTPLUG_CPU is disabled is still present. The > kernel needs to build with this option disabled. > > Enabling HOTPLUG_CPU in defconfig doesn't force everyone to enable that > configuration option; not everyone uses tegra_defconfig, people don't > always update to the latest defconfig, people should be free to disable > functionality they don't need and still get a buildable & working > kernel, etc. > Obviously, I didn't get your problem at your first reply. Sorry. I fixed that and re-checked it again with Tegra20-only, Tegra30-only and both supported kernel. And checked with "git bisect" as well. It should be OK now. Thanks, Joseph > Besides, even if defconfig were a legitimate solution to this problem, > this series still wouldn't work with "git bisect", since the defconfig > patch comes after the patch that causes the build failure. > -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
