On 08/13/2012 05:18 PM, Bjorn Helgaas wrote: > On Mon, Aug 13, 2012 at 11:47 AM, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote: ... >> whereas for a device tree boot: >> >> (same): >>> [ 2.112217] pci 0000:01:00.0: reg 10: [io 0x0000-0x00ff] >>> [ 2.117635] pci 0000:01:00.0: reg 18: [mem 0x00000000-0x00000fff 64bit pref] >>> [ 2.124690] pci 0000:01:00.0: reg 20: [mem 0x00000000-0x00003fff 64bit pref] >>> [ 2.131731] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] >> ... (request region happens early) >>> [ 2.179838] r8169 0000:01:00.0: BAR 0: requesting [io 0x0000-0x00ff] >>> [ 2.193312] r8169 0000:01:00.0: BAR 2: requesting [mem 0x00000000-0x00000fff 64bit pref] >>> [ 2.201397] r8169 0000:01:00.0: BAR 2: can't reserve [mem 0x00000000-0x00000fff 64bit pref] >>> [ 2.209742] r8169 0000:01:00.0: (unregistered net_device): could not request regions >> ... (same, just happens too late) >>> [ 2.236818] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0000000-0xa001ffff pref] >>> [ 2.244027] pci 0000:01:00.0: BAR 4: assigned [mem 0xa0020000-0xa0023fff 64bit pref] >>> [ 2.251794] pci 0000:01:00.0: BAR 2: assigned [mem 0xa0024000-0xa0024fff 64bit pref] >>> [ 2.259542] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] >> >> I suspect this is all still related to the PCI devices themselves being >> probed much earlier in the overall PCI initialization sequence when the >> PCI controller is probed later in the boot sequence, whereas PCI device >> probe is deferred until the overall PCI initialization sequence is >> complete if the PCI controller is probed very early in the boot sequence. > > I don't know what to apply your patches to (they don't apply cleanly > to v3.6-rc2), so I can't see exactly what you're doing. But it looks > like you might be calling pci_bus_add_devices() before > pci_bus_assign_resource(), which isn't going to work. Yes, that's exactly what is happening. PCIe initialization starts in arch/arm/mach-tegra/pci.e tegra_pcie_init() which calls arch/arm/kernel/bios32.c pci_common_init(). That function first calls pcibios_init_hw() (in the same file, more about this later) and then loops over PCI buses, calling amongst other things pci_bus_assign_resources() then pci_bus_add_devices(). The problem is that ARM's pcibios_init_hw() calls pci_scan_root_bus() (or a host-driver-specific function which that also calls pci_scan_root_bus() in Tegra's case) which in turn calls pci_bus_add_devices() right at the end, before control has returned to pci_common_init() and hence before pci_bus_assign_resources() has been called. If I modify pci_scan_root_bus() and remove the call to pci_bus_add_devices(), everything works as expected. So, I guess the question is: Should ARM's pcibios_init_hw() not be calling pci_scan_root_bus(), or at least presumably the ARM PCI code needs to do things in a slightly different order? -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html