Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Also add the tps65910-LDO5 entry and make it always ON to suppy power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx> --- arch/arm/boot/dts/tegra30-cardhu-a02.dts | 76 ++++++++++++++ arch/arm/boot/dts/tegra30-cardhu-a04.dts | 88 +++++++++++++++++ arch/arm/boot/dts/tegra30-cardhu.dtsi | 158 ++++++++++++++++++++++++++++++ 3 files changed, 322 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts index dd870b7..3fe7e23 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -7,5 +7,81 @@ / { model = "NVIDIA Tegra30 Cardhu A02 evaluation board"; compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30"; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + ddr_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&pmic 6 0>; + }; + + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "sys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&pmic 7 0>; + }; + + usb1_vbus_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 68 0>; /* GPIO PI4 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + usb3_vbus_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 63 0>; /* GPIO PH7 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + vdd_5v0_reg: regulator@104 { + compatible = "regulator-fixed"; + reg = <104>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pmic 2 0>; + }; + + vdd_bl_reg: regulator@105 { + compatible = "regulator-fixed"; + reg = <105>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&gpio 83 0>; /* GPIO PK3 */ + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index a4cae6c..7f1ac8b 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -7,4 +7,92 @@ / { model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board"; compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30"; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + ddr_reg: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "ddr"; + reg = <100>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&pmic 7 0>; + }; + + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "sys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&pmic 6 0>; + }; + + usb1_vbus_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 238 0>; /* GPIO PDD6 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + usb3_vbus_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 236 0>; /* GPIO PDD4 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + vdd_5v0_reg: regulator@104 { + compatible = "regulator-fixed"; + reg = <104>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pmic 8 0>; + }; + + vdd_bl_reg: regulator@105 { + compatible = "regulator-fixed"; + reg = <105>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&gpio 234 0>; /* GPIO PDD2 */ + }; + + vdd_bl2_reg: regulator@106 { + compatible = "regulator-fixed"; + reg = <106>; + regulator-name = "vdd_bl2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&gpio 232 0>; /* GPIO PDD0 */ + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index c156273..e40f3fd 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -161,6 +161,7 @@ vcc1-supply = <&vdd_ac_bat_reg>; vcc2-supply = <&vdd_ac_bat_reg>; vcc3-supply = <&vio_reg>; + vcc4-supply = <&vdd_5v0_reg>; vcc5-supply = <&vdd_ac_bat_reg>; vcc6-supply = <&vdd2_reg>; vcc7-supply = <&vdd_ac_bat_reg>; @@ -233,6 +234,15 @@ regulator-always-on; }; + ldo5_reg: regulator@8 { + reg = <8>; + regulator-compatible = "ldo5"; + regulator-name = "vddio_sdmmc,avdd_vdac"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo6_reg: regulator@9 { reg = <9>; regulator-compatible = "ldo6"; @@ -299,6 +309,154 @@ regulator-max-microvolt = <5000000>; regulator-always-on; }; + + cam_1v8_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "cam_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&gpio 220 0>; /* gpio PBB4 */ + vin-supply = <&vio_reg>; + }; + + cp_5v_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "cp_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */ + }; + + emmc_3v3_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "emmc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&gpio 25 0>; /* gpio PD1 */ + vin-supply = <&sys_3v3_reg>; + }; + + modem_3v3_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "modem_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 30 0>; /* gpio PD6> + }; + + pex_hvdd_3v3_reg: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "pex_hvdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 95 0>; /* gpio PL7 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam1_ldo_reg: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "vdd_cam1_ldo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&gpio 142 0>; /* gpio PR6 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam2_ldo_reg: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "vdd_cam2_ldo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&gpio 143 0>; /* gpio PR7 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam3_ldo_reg: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "vdd_cam3_ldo"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 144 0>; /* gpio PS0 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_com_reg: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "vdd_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 24 0>; /* gpio PD0 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_fuse_3v3_reg: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "vdd_fuse_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 94 0>; /* gpio PL6 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_pnl1_reg: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "vdd_pnl1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 92 0>; /* gpio PL4 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_sdmmc1_reg: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "vdd_sdmmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&gpio 31 0>; /* gpio PD7 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_vid_reg: regulator@13 { + compatible = "regulator-fixed"; + reg = <13>; + regulator-name = "vddio_vid"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 152 0>; /* GPIO PT0 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; }; sound { -- 1.7.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html