From: Stephen Warren <swarren@xxxxxxxxxx>
Whistler uses a Maxim 8907 regulator. Instantiate this.
The voltage settings were derived from the schematic. The only exception
is the BBAT voltage; the schematic says 1.2v, but the HW can't go that
low, so use the HW default of 2.4v instead.
Almost all regulators list all driven supply signal names in their
regulator-names property. The exception is nvvdd_sv3, which is in turn
named 12 more different names on the schematic, so these were omitted
for brevity.
Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra20-whistler.dts | 294 ++++++++++++++++++++++++++++++++
1 files changed, 294 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index 6916310..7338baa 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -261,6 +261,285 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ max8907@3c {
+ compatible = "maxim,max8907";
+ reg = <0x3c>;
+ interrupts = <0 86 0x4>;
+
+ mbatt-supply = <&usb0_vbus_reg>;
+ in-v1-supply = <&mbatt_reg>;
+ in-v2-supply = <&mbatt_reg>;
+ in-v3-supply = <&mbatt_reg>;
+ in1-supply = <&mbatt_reg>;
+ in2-supply = <&nvvdd_sv3_reg>;
+ in3-supply = <&mbatt_reg>;
+ in4-supply = <&mbatt_reg>;
+ in5-supply = <&mbatt_reg>;
+ in6-supply = <&mbatt_reg>;
+ in7-supply = <&mbatt_reg>;
+ in8-supply = <&mbatt_reg>;
+ in9-supply = <&mbatt_reg>;
+ in10-supply = <&mbatt_reg>;
+ in11-supply = <&mbatt_reg>;
+ in12-supply = <&mbatt_reg>;
+ in13-supply = <&mbatt_reg>;
+ in14-supply = <&mbatt_reg>;
+ in15-supply = <&mbatt_reg>;
+ in16-supply = <&mbatt_reg>;
+ in17-supply = <&nvvdd_sv3_reg>;
+ in18-supply = <&nvvdd_sv3_reg>;
+ in19-supply = <&mbatt_reg>;
+ in20-supply = <&mbatt_reg>;
+ lxw-supply = <&mbatt_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mbatt_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "mbatt";
+ regulator-name = "vbat_pmu";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sd1";
+ regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sd2";
+ regulator-name = "nvvdd_sv2,vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ nvvdd_sv3_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sd3";
+ regulator-name = "nvvdd_sv3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo1";
+ regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo2";
+ regulator-name = "nvvdd_ldo2,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo3";
+ regulator-name = "nvvdd_ldo3,vcom_1v8b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo4";
+ regulator-name = "nvvdd_ldo4,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo5";
+ regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo6";
+ regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo7";
+ regulator-name = "nvvdd_ldo7,avddio_audio";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo8";
+ regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo9";
+ regulator-name = "nvvdd_ldo9,avdd_cam*";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo10";
+ regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo11";
+ regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@15 {
+ reg = <15>;
+ regulator-compatible = "ldo12";
+ regulator-name = "nvvdd_ldo12,vddio_sdio";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ regulator@16 {
+ reg = <16>;
+ regulator-compatible = "ldo13";
+ regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ regulator@17 {
+ reg = <17>;
+ regulator-compatible = "ldo14";
+ regulator-name = "nvvdd_ldo14,avdd_vdac";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ regulator@18 {
+ reg = <18>;
+ regulator-compatible = "ldo15";
+ regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@19 {
+ reg = <19>;
+ regulator-compatible = "ldo16";
+ regulator-name = "nvvdd_ldo16,vdd_dbrtr";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ regulator@20 {
+ reg = <20>;
+ regulator-compatible = "ldo17";
+ regulator-name = "nvvdd_ldo17,vddio_mipi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ regulator@21 {
+ reg = <21>;
+ regulator-compatible = "ldo18";
+ regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@22 {
+ reg = <22>;
+ regulator-compatible = "ldo19";
+ regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ regulator@23 {
+ reg = <23>;
+ regulator-compatible = "ldo20";
+ regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ regulator@24 {
+ reg = <24>;
+ regulator-compatible = "out5v";
+ regulator-name = "usb0_vbus_reg";
+ };
+
+ regulator@25 {
+ reg = <25>;
+ regulator-compatible = "out33v";
+ regulator-name = "pmu_out3v3";
+ };
+
+ regulator@26 {
+ reg = <26>;
+ regulator-compatible = "bbat";
+ regulator-name = "pmu_bbat";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <2400000>;
+ regulator-always-on;
+ };
+
+ regulator@27 {
+ reg = <27>;
+ regulator-compatible = "sdby";
+ regulator-name = "vdd_aon";
+ regulator-always-on;
+ };
+
+ regulator@28 {
+ reg = <28>;
+ regulator-compatible = "vrtc";
+ regulator-name = "vrtc,pmu_vccadc";
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ pmc {
+ nvidia,invert-interrupt;
};
usb@c5000000 {
@@ -284,6 +563,21 @@
bus-width = <8>;
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb0_vbus_reg: regulator {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-wm8753-whistler",
"nvidia,tegra-audio-wm8753";
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
