The Medcom is a 16:9 15" terminal that is used for patient infotainment
in hospitals.
Signed-off-by: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/tegra20-medcom.dts | 486 +++++++++++++++++++++++++++++++++++
arch/arm/mach-tegra/Makefile.boot | 1 +
2 files changed, 487 insertions(+)
create mode 100644 arch/arm/boot/dts/tegra20-medcom.dts
diff --git a/arch/arm/boot/dts/tegra20-medcom.dts b/arch/arm/boot/dts/tegra20-medcom.dts
new file mode 100644
index 0000000..cc7928d
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-medcom.dts
@@ -0,0 +1,486 @@
+/dts-v1/;
+
+/include/ "tegra20.dtsi"
+
+/ {
+ model = "Avionic Design Medcom-Wide board";
+ compatible = "ad,medcom-wide", "nvidia,tegra20";
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ata {
+ nvidia,pins = "ata";
+ nvidia,function = "ide";
+ };
+ atb {
+ nvidia,pins = "atb", "gma", "gme";
+ nvidia,function = "sdio4";
+ };
+ atc {
+ nvidia,pins = "atc";
+ nvidia,function = "nand";
+ };
+ atd {
+ nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+ "spia", "spib", "spic";
+ nvidia,function = "gmi";
+ };
+ cdev1 {
+ nvidia,pins = "cdev1";
+ nvidia,function = "plla_out";
+ };
+ cdev2 {
+ nvidia,pins = "cdev2";
+ nvidia,function = "pllp_out4";
+ };
+ crtp {
+ nvidia,pins = "crtp";
+ nvidia,function = "crt";
+ };
+ csus {
+ nvidia,pins = "csus";
+ nvidia,function = "vi_sensor_clk";
+ };
+ dap1 {
+ nvidia,pins = "dap1";
+ nvidia,function = "dap1";
+ };
+ dap2 {
+ nvidia,pins = "dap2";
+ nvidia,function = "dap2";
+ };
+ dap3 {
+ nvidia,pins = "dap3";
+ nvidia,function = "dap3";
+ };
+ dap4 {
+ nvidia,pins = "dap4";
+ nvidia,function = "dap4";
+ };
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "i2c2";
+ };
+ dta {
+ nvidia,pins = "dta", "dtd";
+ nvidia,function = "sdio2";
+ };
+ dtb {
+ nvidia,pins = "dtb", "dtc", "dte";
+ nvidia,function = "rsvd1";
+ };
+ dtf {
+ nvidia,pins = "dtf";
+ nvidia,function = "i2c3";
+ };
+ gmc {
+ nvidia,pins = "gmc";
+ nvidia,function = "uartd";
+ };
+ gpu7 {
+ nvidia,pins = "gpu7";
+ nvidia,function = "rtck";
+ };
+ gpv {
+ nvidia,pins = "gpv", "slxa", "slxk";
+ nvidia,function = "pcie";
+ };
+ hdint {
+ nvidia,pins = "hdint", "pta";
+ nvidia,function = "hdmi";
+ };
+ i2cp {
+ nvidia,pins = "i2cp";
+ nvidia,function = "i2cp";
+ };
+ irrx {
+ nvidia,pins = "irrx", "irtx";
+ nvidia,function = "uarta";
+ };
+ kbca {
+ nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+ "kbce", "kbcf";
+ nvidia,function = "kbc";
+ };
+ lcsn {
+ nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+ "ld3", "ld4", "ld5", "ld6", "ld7",
+ "ld8", "ld9", "ld10", "ld11", "ld12",
+ "ld13", "ld14", "ld15", "ld16", "ld17",
+ "ldc", "ldi", "lhp0", "lhp1", "lhp2",
+ "lhs", "lm0", "lm1", "lpp", "lpw0",
+ "lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+ "lsda", "lsdi", "lspi", "lvp0", "lvp1",
+ "lvs";
+ nvidia,function = "displaya";
+ };
+ owc {
+ nvidia,pins = "owc", "spdi", "spdo", "uac";
+ nvidia,function = "rsvd2";
+ };
+ pmc {
+ nvidia,pins = "pmc";
+ nvidia,function = "pwr_on";
+ };
+ rm {
+ nvidia,pins = "rm";
+ nvidia,function = "i2c1";
+ };
+ sdb {
+ nvidia,pins = "sdb", "sdc", "sdd";
+ nvidia,function = "pwm";
+ };
+ sdio1 {
+ nvidia,pins = "sdio1";
+ nvidia,function = "sdio1";
+ };
+ slxc {
+ nvidia,pins = "slxc", "slxd";
+ nvidia,function = "spdif";
+ };
+ spid {
+ nvidia,pins = "spid", "spie", "spif";
+ nvidia,function = "spi1";
+ };
+ spig {
+ nvidia,pins = "spig", "spih";
+ nvidia,function = "spi2_alt";
+ };
+ uaa {
+ nvidia,pins = "uaa", "uab", "uda";
+ nvidia,function = "ulpi";
+ };
+ uad {
+ nvidia,pins = "uad";
+ nvidia,function = "irda";
+ };
+ uca {
+ nvidia,pins = "uca", "ucb";
+ nvidia,function = "uartc";
+ };
+ conf_ata {
+ nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+ "cdev1", "cdev2", "dap1", "dtb", "gma",
+ "gmb", "gmc", "gmd", "gme", "gpu7",
+ "gpv", "i2cp", "pta", "rm", "slxa",
+ "slxk", "spia", "spib", "uac";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ conf_ck32 {
+ nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+ "pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+ nvidia,pull = <0>;
+ };
+ conf_csus {
+ nvidia,pins = "csus", "spid", "spif";
+ nvidia,pull = <1>;
+ nvidia,tristate = <1>;
+ };
+ conf_crtp {
+ nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+ "dtc", "dte", "dtf", "gpu", "sdio1",
+ "slxc", "slxd", "spdi", "spdo", "spig",
+ "uda";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ conf_ddc {
+ nvidia,pins = "ddc", "dta", "dtd", "kbca",
+ "kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+ "sdc";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ conf_hdint {
+ nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+ "lpw1", "lsc1", "lsck", "lsda", "lsdi",
+ "lvp0", "owc", "sdb";
+ nvidia,tristate = <1>;
+ };
+ conf_irrx {
+ nvidia,pins = "irrx", "irtx", "sdd", "spic",
+ "spie", "spih", "uaa", "uab", "uad",
+ "uca", "ucb";
+ nvidia,pull = <2>;
+ nvidia,tristate = <1>;
+ };
+ conf_lc {
+ nvidia,pins = "lc", "ls";
+ nvidia,pull = <2>;
+ };
+ conf_ld0 {
+ nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+ "ld5", "ld6", "ld7", "ld8", "ld9",
+ "ld10", "ld11", "ld12", "ld13", "ld14",
+ "ld15", "ld16", "ld17", "ldi", "lhp0",
+ "lhp1", "lhp2", "lhs", "lm0", "lpp",
+ "lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+ "lvs", "pmc";
+ nvidia,tristate = <0>;
+ };
+ conf_ld17_0 {
+ nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+ "ld23_22";
+ nvidia,pull = <1>;
+ };
+ };
+ };
+
+ i2s@70002800 {
+ status = "okay";
+ };
+
+ serial@70006300 {
+ clock-frequency = <216000000>;
+ status = "okay";
+ };
+
+ i2c@7000c000 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <187 0x04>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = <0xffffffff
+ 0xffffffff
+ 0
+ 0xffffffff
+ 0xffffffff>;
+ };
+ };
+
+ i2c@7000d000 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ pmu: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 86 0x4>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sm0-supply = <&vdd_sys_sm0>;
+ sm1-supply = <&vdd_sys_sm1>;
+ sm2-supply = <&vdd_sys_sm2>;
+ vinldo01-supply = <&sm2>;
+ vinldo23-supply = <&sm2>;
+ vinldo4-supply = <&sm2>;
+ vinldo678-supply = <&sm2>;
+ vinldo9-supply = <&sm2>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sm0: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "sm0";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm1: regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sm1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sm2: regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sm2";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo0: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "ldo0";
+ regulator-name = "PCIE CLK";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo1: regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo2: regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo3: regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo4: regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5: regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo5";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ ldo6: regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo6";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ ldo7: regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo7";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo8: regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo9: regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo9";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ pmc {
+ nvidia,invert-interrupt;
+ };
+
+ usb@c5008000 {
+ status = "okay";
+ };
+
+ sdhci@c8000600 {
+ cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+ wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+ status = "okay";
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 5000000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ vdd_sys_sm0: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0 1>;
+
+ regulator-name = "VDD_SYS_SM0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_sys_sm1: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1 1>;
+
+ regulator-name = "VDD_SYS_SM1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_sys_sm2: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2 1>;
+
+ regulator-name = "VDD_SYS_SM2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-wm8903-harmony",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "Avionic Design Medcom-Wide";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
+ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
+ };
+};
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index ad27d36..84757e0 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -9,4 +9,5 @@ dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-plutux.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-medcom.dtb
dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb
--
1.7.11.2
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
