This adds wlan pinmux and gpio settings to the Tegra20 Ventana device tree.
Signed-off-by: Wei Ni <wni@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra20-ventana.dts | 20 ++++++++++++++++++--
1 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index be90544..42dbacc 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -198,7 +198,8 @@
nvidia,tristate = <1>;
};
conf_dta {
- nvidia,pins = "dta", "dtb", "dtc", "dtd";
+ nvidia,pins = "dta", "dtb", "dtc", "dtd",
+ "kbcb";
nvidia,pull = <1>;
nvidia,tristate = <0>;
};
@@ -213,7 +214,7 @@
nvidia,tristate = <1>;
};
conf_kbca {
- nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+ nvidia,pins = "kbca", "kbcc", "kbcd",
"kbce", "kbcf", "sdio1", "uaa", "uab";
nvidia,pull = <2>;
nvidia,tristate = <0>;
@@ -237,6 +238,16 @@
"ld23_22";
nvidia,pull = <1>;
};
+ drive_sdio1 {
+ nvidia,pins = "drive_sdio1";
+ nvidia,high-speed-mode = <0>;
+ nvidia,schmitt = <1>;
+ nvidia,low-power-mode = <3>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising = <3>;
+ nvidia,slew-rate-falling = <3>;
+ };
};
};
@@ -304,6 +315,11 @@
status = "okay";
};
+ sdhci@c8000000 {
+ status = "okay";
+ power-gpios = <&gpio 86 0>; /* gpio PK6 */
+ };
+
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
