On 06/27/2012 05:31 AM, Mark Brown wrote: > On Tue, Jun 26, 2012 at 06:31:00PM -0600, Stephen Warren wrote: > >> sm1: HW defaults and schematic match at 1.0v. marvin24's kernel had a max >> of 1.125v, but this wasn't applied since apply_uV wasn't set. > > apply_uV is only valid if a single voltage is specified. If a voltage > range were specified and it were acted on we'd take the lowest (not > highest) voltage allowed. Ah right. When I apply this, I'll reword that to something more like: sm1: HW defaults and schematic match at 1.0v. marvin24's kernel had a max of 1.125v, but this higher voltage was only applied to HW by DVFS code, which isn't currently supported in mainline. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
