From: Stephen Warren <swarren@xxxxxxxxxx>
* Make ARCH_TEGRA select USE_OF; DT is the way forward.
* Build board-dt-tegra*.c when the relevant Tegra SoC support is enabled,
rather than requiring a specific config option for this.
* The board-specific config options already build board-*-pinmux.o, and
when booting from device tree these files are no longer needed, so we
can remove some Makefile commands related to those files.
Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-tegra/Kconfig | 7 -------
arch/arm/mach-tegra/Makefile | 10 +++-------
3 files changed, 4 insertions(+), 14 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8a045ec..dd17f34 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -658,6 +658,7 @@ config ARCH_TEGRA
select MIGHT_HAVE_CACHE_L2X0
select NEED_MACH_IO_H if PCI
select ARCH_HAS_CPUFREQ
+ select USE_OF
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 5b9b116..621466a 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -87,13 +87,6 @@ config MACH_SEABOARD
also be included for some of the derivative boards that
have large similarities with the seaboard design.
-config MACH_TEGRA_DT
- bool "Generic Tegra20 board (FDT support)"
- depends on ARCH_TEGRA_2x_SOC
- select USE_OF
- help
- Support for generic NVIDIA Tegra20 boards using Flattened Device Tree
-
config MACH_TRIMSLICE
bool "TrimSlice board"
depends on ARCH_TEGRA_2x_SOC
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 2eb4445..60a0213 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_CPU_IDLE) += sleep.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += powergate.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_SMP) += reset.o
@@ -23,6 +22,9 @@ obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o
obj-$(CONFIG_TEGRA_PCI) += pcie.o
obj-$(CONFIG_USB_SUPPORT) += usb_phy.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o
+
obj-$(CONFIG_MACH_HARMONY) += board-harmony.o
obj-$(CONFIG_MACH_HARMONY) += board-harmony-pinmux.o
obj-$(CONFIG_MACH_HARMONY) += board-harmony-pcie.o
@@ -34,11 +36,5 @@ obj-$(CONFIG_MACH_PAZ00) += board-paz00-pinmux.o
obj-$(CONFIG_MACH_SEABOARD) += board-seaboard.o
obj-$(CONFIG_MACH_SEABOARD) += board-seaboard-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT) += board-dt-tegra20.o
-obj-$(CONFIG_MACH_TEGRA_DT) += board-harmony-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT) += board-seaboard-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT) += board-paz00-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT) += board-trimslice-pinmux.o
-
obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice.o
obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice-pinmux.o
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
