From: Stephen Warren <swarren@xxxxxxxxxx> When a Tegra GPIO is used as an IRQ, it should be enabled as a GPIO (so the pinmux module isn't driving it as an output) and configured as a GPIO input (so the GPIO module isn't driving it as an output). Set this up automatically whenever an IRQ is requested, so that users of IRQs don't need to do this. Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx> --- drivers/gpio/gpio-tegra.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index 12f349b..4383a72 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -224,6 +224,9 @@ static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type) spin_unlock_irqrestore(&bank->lvl_lock[port], flags); + tegra_gpio_mask_write(GPIO_MSK_OE(gpio), gpio, 0); + tegra_gpio_enable(gpio); + if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) __irq_set_handler_locked(d->irq, handle_level_irq); else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
