On Tue, Mar 20, 2012 at 10:44 AM, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote:
> The core pin controller bindings define:
> * The fact that pin controllers expose pin configurations as nodes in
> device tree.
> * That the bindings for those pin configuration nodes is defined by the
> individual pin controller drivers.
> * A standardized set of properties for client devices to define numbered
> or named pin configuration states, each referring to some number of the
> afore-mentioned pin configuration nodes.
> * That the bindings for the client devices determines the set of numbered
> or named states that must exist.
>
> Signed-off-by: Stephen Warren <swarren@xxxxxxxxxxxxx>
> Acked-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
> Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Acked-by: Simon Glass <sjg@xxxxxxxxxxxx>
> ---
> v2: Fix a couple of grammar-os per Randy Dunlap. Add example of a client
> device that references no pin configuration nodes per Dong Aisheng.
> ---
> .../bindings/pinctrl/pinctrl-bindings.txt | 128 ++++++++++++++++++++
> 1 files changed, 128 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> new file mode 100644
> index 0000000..c95ea82
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> @@ -0,0 +1,128 @@
> +== Introduction ==
> +
> +Hardware modules that control pin multiplexing or configuration parameters
> +such as pull-up/down, tri-state, drive-strength etc are designated as pin
> +controllers. Each pin controller must be represented as a node in device tree,
> +just like any other hardware module.
> +
> +Hardware modules whose signals are affected by pin configuration are
> +designated client devices. Again, each client device must be represented as a
> +node in device tree, just like any other hardware module.
> +
> +For a client device to operate correctly, certain pin controllers must
> +set up certain specific pin configurations. Some client devices need a
> +single static pin configuration, e.g. set up during initialization. Others
> +need to reconfigure pins at run-time, for example to tri-state pins when the
> +device is inactive. Hence, each client device can define a set of named
> +states. The number and names of those states is defined by the client device's
> +own binding.
> +
> +The common pinctrl bindings defined in this file provide an infrastructure
> +for client device device tree nodes to map those state names to the pin
> +configuration used by those states.
> +
> +Note that pin controllers themselves may also be client devices of themselves.
> +For example, a pin controller may set up its own "active" state when the
> +driver loads. This would allow representing a board's static pin configuration
> +in a single place, rather than splitting it across multiple client device
> +nodes. The decision to do this or not somewhat rests with the author of
> +individual board device tree files, and any requirements imposed by the
> +bindings for the individual client devices in use by that board, i.e. whether
> +they require certain specific named states for dynamic pin configuration.
> +
> +== Pinctrl client devices ==
> +
> +For each client device individually, every pin state is assigned an integer
> +ID. These numbers start at 0, and are contiguous. For each state ID, a unique
> +property exists to define the pin configuration. Each state may also be
> +assigned a name. When names are used, another property exists to map from
> +those names to the integer IDs.
> +
> +Each client device's own binding determines the set of states the must be
> +defined in its device tree node, and whether to define the set of state
> +IDs that must be provided, or whether to define the set of state names that
> +must be provided.
> +
> +Required properties:
> +pinctrl-0: List of phandles, each pointing at a pin configuration
> + node. These referenced pin configuration nodes must be child
> + nodes of the pin controller that they configure. Multiple
> + entries may exist in this list so that multiple pin
> + controllers may be configured, or so that a state may be built
> + from multiple nodes for a single pin controller, each
> + contributing part of the overall configuration. See the next
> + section of this document for details of the format of these
> + pin configuration nodes.
> +
> + In some cases, it may be useful to define a state, but for it
> + to be empty. This may be required when a common IP block is
> + used in an SoC either without a pin controller, or where the
> + pin controller does not affect the HW module in question. If
> + the binding for that IP block requires certain pin states to
> + exist, they must still be defined, but may be left empty.
> +
> +Optional properties:
> +pinctrl-1: List of phandles, each pointing at a pin configuration
> + node within a pin controller.
> +...
> +pinctrl-n: List of phandles, each pointing at a pin configuration
> + node within a pin controller.
> +pinctrl-names: The list of names to assign states. List entry 0 defines the
> + name for integer state ID 0, list entry 1 for state ID 1, and
> + so on.
> +
> +For example:
> +
> + /* For a client device requiring named states */
> + device {
> + pinctrl-names = "active", "idle";
> + pinctrl-0 = <&state_0_node_a>;
> + pinctrl-1 = <&state_1_node_a &state_1_node_b>;
> + };
> +
> + /* For the same device if using state IDs */
> + device {
> + pinctrl-0 = <&state_0_node_a>;
> + pinctrl-1 = <&state_1_node_a &state_1_node_b>;
> + };
> +
> + /*
> + * For an IP block whose binding supports pin configuration,
> + * but in use on an SoC that doesn't have any pin control hardware
> + */
> + device {
> + pinctrl-names = "active", "idle";
> + pinctrl-0 = <>;
> + pinctrl-1 = <>;
> + };
> +
> +== Pin controller devices ==
> +
> +Pin controller devices should contain the pin configuration nodes that client
> +devices reference.
> +
> +For example:
> +
> + pincontroller {
> + ... /* Standard DT properties for the device itself elided */
> +
> + state_0_node_a {
> + ...
> + };
> + state_1_node_a {
> + ...
> + };
> + state_1_node_b {
> + ...
> + };
> + }
> +
> +The contents of each of those pin configuration child nodes is defined
> +entirely by the binding for the individual pin controller device. There
> +exists no common standard for this content.
> +
> +The pin configuration nodes need not be direct children of the pin controller
> +device; they may be grandchildren, for example. Whether this is legal, and
> +whether there is any interaction between the child and intermediate parent
> +nodes, is again defined entirely by the binding for the individual pin
> +controller device.
> --
> 1.7.0.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
