Pin group PTA does not support function RSVD3. However, the current
pinmux driver doesn't check this when setting RSVD functions, and ends
up writing 3 to the HW register. 3 is actually represented by function
GMI, so update the pinmux table to request that instead in order to
obtain the same register programming without requesting invalid
configurations.
Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx>
---
arch/arm/mach-tegra/board-trimslice-pinmux.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index 7ab719d..5daa6e8 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -105,7 +105,7 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_LVS, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_OWC, TEGRA_MUX_RSVD2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_PMC, TEGRA_MUX_PWR_ON, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_PTA, TEGRA_MUX_RSVD3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_PTA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_RM, TEGRA_MUX_I2C, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SDB, TEGRA_MUX_PWM, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SDC, TEGRA_MUX_PWM, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
