Grant Likely wrote at Wednesday, July 20, 2011 12:28 PM: > On Wed, Jul 20, 2011 at 08:37:19AM -0700, Stephen Warren wrote: > > Grant Likely wrote at Tuesday, July 19, 2011 5:43 PM: > > > Everything required to populate NVIDIA Tegra devices from the device > > > tree. This patch adds a new DT_MACHINE_DESC() which matches against > > > a tegra20 device tree. So far it only registers the on-chip devices, > > > but it will be refined in follow on patches to configure clocks and > > > pin IO from the device tree also. ... > > > diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts > > > > tegra-*.dts don't include status="disable" for all the unused controllers. > > Should that be added? > > I dropped that pattern since my preference has been to have boards > explicitly disable unused cores and that has generally been the > pattern on other DT platforms. Sorry if I wasn't clear, but what I meant was that the board-specific files tegra-harmony.dts and tegra-seaboard.dts don't include the status= "disable" entries for the modules/ports they don't use. Still, everything probably works OK without that... -- nvpublic -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html