Marc Dietrich wrote at Friday, July 15, 2011 4:24 AM:
> UART-A is connected to JP1 and used by the bootloader for debugging
> output while UART-D is connected to the mini-pcie expansion slot.
>
> Signed-off-by: Marc Dietrich <marvin24@xxxxxx>
> ---
> arch/arm/mach-tegra/board-paz00.c | 11 +++++++++++
> 1 files changed, 11 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
> index 1b076f6..931b06e 100644
> --- a/arch/arm/mach-tegra/board-paz00.c
> +++ b/arch/arm/mach-tegra/board-paz00.c
> @@ -47,7 +47,17 @@
> #include "gpio-names.h"
>
> static struct plat_serial8250_port debug_uart_platform_data[] = {
> +/* serial port on JP1 */
> {
Shouldn't the indentation of the comment be aligned to the brace?
I'm not sure if the order of entries in the array matters. It'd presumably
be safer to add the new UART entry to the end of the array so that any
existing index-based number isn't changed.
> + .membase = IO_ADDRESS(TEGRA_UARTA_BASE),
> + .mapbase = TEGRA_UARTA_BASE,
> + .irq = INT_UARTA,
> + .flags = UPF_BOOT_AUTOCONF,
> + .iotype = UPIO_MEM,
> + .regshift = 2,
> + .uartclk = 216000000,
> + }, {
> +/* serial port on mini-pcie */
> .membase = IO_ADDRESS(TEGRA_UARTD_BASE),
> .mapbase = TEGRA_UARTD_BASE,
> .irq = INT_UARTD,
> @@ -137,6 +147,7 @@ static void __init tegra_paz00_fixup(struct machine_desc *desc,
>
> static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
> /* name parent rate enabled */
> + { "uarta", "pll_p", 216000000, true },
> { "uartd", "pll_p", 216000000, true },
> { NULL, NULL, 0, 0},
> };
> --
> 1.7.4.1
--
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
