Am Freitag, 15. Juli 2011, 11:13:48 schrieb Marc Dietrich: > see comment for PATCH 1/2 > > Am Sun, 10 Jul 2011 15:19:34 -0700 > > schrieb Colin Cross <ccross@xxxxxxxxxxx>: > > trimslice and paz00 both have functionally identical platform > > data for the tegra-ehci driver. Move the platform data into > > devices.c, and remove it from all the board files. > > > > Signed-off-by: Colin Cross <ccross@xxxxxxxxxxx> > > Acked-By: Marc Dietrich <marvin24@xxxxxx> > > > --- > > > > arch/arm/mach-tegra/board-paz00.c | 26 > > > > > > -static struct tegra_ulpi_config ulpi_phy_config = { > > - .reset_gpio = TEGRA_ULPI_RST, > > - .clk = "cdev2", > > -}; > > - > > -static struct tegra_ehci_platform_data tegra_ehci_pdata[] = { > > - [0] = { > > - .operating_mode = TEGRA_USB_OTG, > > - .power_down_on_bus_suspend = 1, > > - }, > > - [1] = { > > - .phy_config = &ulpi_phy_config, > > - .operating_mode = TEGRA_USB_HOST, > > - .power_down_on_bus_suspend = 1, > > - }, > > - [2] = { > > - .operating_mode = TEGRA_USB_HOST, > > - .power_down_on_bus_suspend = 1, > > - }, > > -}; I'm not sure about this. For paz00 tegra_ehci3_device also leads to an external usb port. With power_down_on_bus_suspend = 1 hotplugging usb devices doesn't work (as the bus might be suspended at the time). >From the initial commit message of ehci-tegra on android.git.kernel.org: "For additional power saving, the driver supports powering down the phy on bus suspend when it is used, for example, to connect an internal device that use an out-of-band remote wakeup mechanism (e.g. a gpio)." So my guess was, that the correct handling of this was setting power_down_on_bus_suspend to 0 - which did fix the problem. With this data moving to devices.c, setting this would also change the trimslice behaviour which would be a problem. In the end I'm not sure if setting power_down_on_bus_suspend to 0 is the correct solution to the hotplug problem or if a better solution exists. Thanks Heiko -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html