On Tue, Jun 7, 2011 at 6:53 PM, Robert Morell <rmorell@xxxxxxxxxx> wrote: > Although disp1 and disp2 have 7.1 divisors, their corresponding > registers in the clk_rst block are not the interface to program the > divisors. Setting the generic DIV_U71 flag may cause the code to > attempt to program the clock at a different divisor, which will confuse > any code attempting to use that clock since it isn't actually being > divided. > > Signed-off-by: Robert Morell <rmorell@xxxxxxxxxx> > --- > > This bugfix applies to Linus's 2.6.39. However, since no drivers are using > these clocks in that kernel, this should probably just be queued up for 3.0. > > It also applies to linux-tegra-2.6.3[69]. > > Thanks. > > arch/arm/mach-tegra/tegra2_clocks.c | 4 ++-- > 1 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c > index bb61807..0fe9b3e 100644 > --- a/arch/arm/mach-tegra/tegra2_clocks.c > +++ b/arch/arm/mach-tegra/tegra2_clocks.c > @@ -2182,8 +2182,8 @@ struct clk tegra_list_clks[] = { > PERIPH_CLK("tvo", "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ > PERIPH_CLK("hdmi", "hdmi", NULL, 51, 0x18c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ > PERIPH_CLK("tvdac", "tvdac", NULL, 53, 0x194, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ > - PERIPH_CLK("disp1", "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ > - PERIPH_CLK("disp2", "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ > + PERIPH_CLK("disp1", "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX), /* scales with voltage and process_id */ > + PERIPH_CLK("disp2", "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX), /* scales with voltage and process_id */ > PERIPH_CLK("usbd", "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ > PERIPH_CLK("usb2", "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ > PERIPH_CLK("usb3", "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ > -- > 1.7.3.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-tegra" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Ack, putting in for-next for 3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html