When a break is received, Tegra's UART apparently fills the FIFO with
0 bytes. These must be drained so that they aren't interpreted as actual
data received. This allows e.g. MAGIC_SYSRQ to work on Tegra's UARTs.
Originally-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
Cc: Laxman Dewangan <ldewangan@xxxxxxxxxx>
Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx>
---
drivers/tty/serial/8250.c | 23 +++++++++++++++++++++++
include/linux/serial_reg.h | 1 +
2 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index a5e290d..699323f 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -1433,6 +1433,22 @@ static void serial8250_enable_ms(struct uart_port *port)
serial_out(up, UART_IER, up->ier);
}
+/* Clear the rx fifo */
+static void clear_rx_fifo(struct uart_8250_port *up)
+{
+ unsigned int status, tmout = 10000;
+ do {
+ status = serial_in(up, UART_LSR);
+ if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
+ status = serial_in(up, UART_RX);
+ else
+ break;
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while (1);
+}
+
static void
receive_chars(struct uart_8250_port *up, unsigned int *status)
{
@@ -1468,6 +1484,13 @@ receive_chars(struct uart_8250_port *up, unsigned int *status)
lsr &= ~(UART_LSR_FE | UART_LSR_PE);
up->port.icount.brk++;
/*
+ * If tegra port then clear the rx fifo to
+ * accept another break/character.
+ */
+ if (up->port.type == PORT_TEGRA)
+ clear_rx_fifo(up);
+
+ /*
* We do the SysRQ and SAK checking
* here because otherwise the break
* may get masked by ignore_status_mask
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 5f66e84..c75bda3 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -119,6 +119,7 @@
#define UART_MCR_DTR 0x01 /* DTR complement */
#define UART_LSR 5 /* In: Line Status Register */
+#define UART_LSR_FIFOE 0x80 /* Fifo error */
#define UART_LSR_TEMT 0x40 /* Transmitter empty */
#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
#define UART_LSR_BI 0x10 /* Break interrupt indicator */
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
