Technically, we need to request and configure the GPIO used as the WM8903 interrupt. This prevents conflicting registrations, and assures that the GPIO is correctly configured in all cases, e.g. if the bootloader left the GPIO in some unexpected state. In practice, the previous code works as-is, at least when using ChromeOS's U-Boot as the boot-loader. Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx> --- Note: For Harmony, we don't have to do this inside harmony_pinmux_init (see Seaboard's seaboard_pinmux_init in patch 3 in this series) because pingroup SPIC pins are all input on Harmony. arch/arm/mach-tegra/board-harmony.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c index 30e18bc..87cbc4b 100644 --- a/arch/arm/mach-tegra/board-harmony.c +++ b/arch/arm/mach-tegra/board-harmony.c @@ -131,6 +131,9 @@ static void __init harmony_i2c_init(void) platform_device_register(&tegra_i2c_device3); platform_device_register(&tegra_i2c_device4); + gpio_request(TEGRA_GPIO_CDC_IRQ, "wm8903"); + gpio_direction_input(TEGRA_GPIO_CDC_IRQ); + i2c_register_board_info(0, &wm8903_board_info, 1); } -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
