On Mon, Feb 21, 2011 at 9:32 PM, Olof Johansson <olof@xxxxxxxxx> wrote: > Hi, > > > On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@xxxxxxxxxxx> wrote: >> Enable the timer and rtc clocks to prevent them being >> turned off by the bootloader clock disabling code. >> >> Signed-off-by: Colin Cross <ccross@xxxxxxxxxxx> >> --- >> arch/arm/mach-tegra/timer.c | 14 ++++++++++++-- >> 1 files changed, 12 insertions(+), 2 deletions(-) >> >> diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c >> index ffa6a68..31b4f56 100644 >> --- a/arch/arm/mach-tegra/timer.c >> +++ b/arch/arm/mach-tegra/timer.c >> @@ -18,6 +18,7 @@ >> */ >> >> #include <linux/init.h> >> +#include <linux/err.h> >> #include <linux/sched.h> >> #include <linux/time.h> >> #include <linux/interrupt.h> >> @@ -193,9 +194,20 @@ static struct irqaction tegra_timer_irq = { >> >> static void __init tegra_init_timer(void) >> { >> + struct clk *clk; >> unsigned long rate = clk_measure_input_freq(); >> int ret; >> >> + clk = clk_get_sys("timer", NULL); >> + BUG_ON(IS_ERR(clk)); >> + clk_enable(clk); >> + clk_put(clk); >> + >> + clk = clk_get_sys("rtc-tegra", NULL); >> + BUG_ON(IS_ERR(clk)); >> + clk_enable(clk); >> + clk_put(clk); > > Why initialize the rtc clock here? Not all boards use it and instead > use the rtc on the pmic. Seems wasteful to clock it unless the driver > for it is probed and configured. timekeeping_suspend uses read_persistent_clock and not the RTC driver to track time in suspend. The Tegra implementation of read_persistent_clock reads from the internal RTC registers. Its a 32 kHz clock, so it's power usage is negligible, and it is required on all Tegra boards. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html