FWIW: I read the scsi-target-utils Quickstart Guide and noticed that the Guide prefers to use the /usr/sbin/tgtadm command so I've verified the configuration using /usr/sbin/tgtadm *instead*of* /usr/sbin/tgt-admin and found that the results are identical. > [root@aoe-1 ~]# tgtadm --lld iscsi --mode target --op show > /tmp/tgtadm.txt > [root@aoe-1 ~]# tgt-admin -s > /tmp/tgt-admin.txt > [root@aoe-1 ~]# diff /tmp/tgtadm.txt /tmp/tgt-admin.txt Thanks, again! Eric Pretorious On Sat, Oct 18, 2014 at 11:16 AM, eric pretorious <epretorious@xxxxxxxxx> wrote: >> [root@aoe-1 ~]# tgt-admin -s >> Target 1: iqn.2014-09.com.example.san-1:drbd0 >> System information: >> Driver: iscsi >> State: ready >> I_T nexus information: >> LUN information: >> LUN: 0 >> Type: controller >> SCSI ID: IET 00010000 >> SCSI SN: beaf10 >> Size: 0 MB, Block size: 1 >> Online: Yes >> Removable media: No >> Prevent removal: No >> Readonly: No >> Backing store type: null >> Backing store path: None >> Backing store flags: >> LUN: 1 >> Type: disk >> SCSI ID: IET 00010001 >> SCSI SN: beaf11 >> Size: 535 MB, Block size: 512 >> Online: Yes >> Removable media: No >> Prevent removal: No >> Readonly: No >> Backing store type: rdwr >> Backing store path: /dev/drbd0 >> Backing store flags: >> Account information: >> ACL information: >> ALL -- To unsubscribe from this list: send the line "unsubscribe stgt" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
