Re: Cannot connect iSCSI initiator to two TGT hosts at once...

[Clay Goss <claygoss@xxxxxxxxxxxxxxxxxxxxxxxx>]

As I suspected, a reboot left me with no target.  Using the commands
from my previous post, here is what I get:

[root@ITSAN002 ~]# tgt-admin --show
Target 2: iqn.2013-04.net.issuestechnology.target2
    System information:
        Driver: iscsi
        State: ready
    I_T nexus information:
        I_T nexus: 1
            Initiator: iqn.1998-01.com.vmware:itnb001-2df62dd0
            Connection: 0
                IP Address: 10.20.30.5
        I_T nexus: 2
            Initiator: iqn.1998-01.com.vmware:itnb001-2df62dd0
            Connection: 0
                IP Address: 10.20.30.5
    LUN information:
        LUN: 0
            Type: controller
            SCSI ID: IET     00020000
            SCSI SN: beaf20
            Size: 0 MB, Block size: 1
            Online: Yes
            Removable media: No
            Prevent removal: No
            Readonly: No
            Backing store type: null
            Backing store path: None
            Backing store flags:
        LUN: 1
            Type: disk
            SCSI ID: IET     00020001
            SCSI SN: beaf21
            Size: 1980718 MB, Block size: 512
            Online: Yes
            Removable media: No
            Prevent removal: No
            Readonly: No
            Backing store type: rdwr
            Backing store path: /dev/vg_itsan002/lv_itsan002
            Backing store flags:
    Account information:
    ACL information:
        ALL

So, how do I get this in a conf file and therefore, persistent?
--
To unsubscribe from this list: send the line "unsubscribe stgt" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html