Hi,
The initiator can't use the iSCSI tape target correctly. Here is my
configuration :
* On the TARGET ( using tgt-1.0.33 , ubuntu 10.04, 2.6.32-43-server ) :
root@TARGET:~/tgt/tgt-1.0.33# usr/tgtadm --lld iscsi --op show --mode
target
Target 1: iqn.2001-04.backup.orange:vtl1
System information:
Driver: iscsi
State: ready
I_T nexus information:
LUN information:
LUN: 0
Type: controller
SCSI ID: IET 00010000
SCSI SN: beaf10
Size: 0 MB, Block size: 1
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
Thin-provisioning: No
Backing store type: null
Backing store path: None
Backing store flags:
LUN: 1
Type: passthrough
SCSI ID: IET 00010001
SCSI SN: beaf11
Size: 0 MB, Block size: 1
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
Thin-provisioning: No
Backing store type: sg
Backing store path: /dev/sg6
Backing store flags:
LUN: 2
Type: passthrough
SCSI ID: IET 00010002
SCSI SN: beaf12
Size: 0 MB, Block size: 1
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
Thin-provisioning: No
Backing store type: sg
Backing store path: /dev/sg5
Backing store flags:
Account information:
ACL information:
ALL
root@TARGET:~/tgt/tgt-1.0.33# mtx -f /dev/sg5 status
Storage Changer /dev/sg5:1 Drives, 16 Slots ( 0 Import/Export )
etc.....=> OK
---------------------------------
* On the INITIATOR : (Centos 5.6, 2.6.18-149.el5xen )
[root@INITIATOR tmp]# iscsiadm --version
iscsiadm version 2.0-872
[root@INITIATOR tmp]# lsscsi -g
[15:0:0:0] storage IET Controller 0001 - /dev/sg0
[15:0:0:1] tape HP Ultrium 2-SCSI F59W /dev/st0 /dev/sg1
[15:0:0:2] mediumx HP UHDL-LTO 0014 - /dev/sg2
[root@backup02 tmp]# mtx -f /dev/sg2 status
mtx: Request Sense: Long Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=0 (Unknown?!)
mtx: Request Sense: Sense Key=No Sense
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense: Additional Sense Code = 00
mtx: Request Sense: Additional Sense Qualifier = 00
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in CDB=no
mtx: Request Sense: SKSV=no
READ ELEMENT STATUS Command Failed
=> KO
I hope someone know this issue, thanks a lot !
--
Fabrice
--
To unsubscribe from this list: send the line "unsubscribe stgt" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
