Try again, this time a 'reply all' 2G... Sounds like this is a 32bit setup. Try adding a "-D_LARGEFILE64_SOURCE" to the CFLAGS in usr/Makefile.. e.g. Include a CFLAGS += -D_LARGEFILE64_SOURCE along with the reset of the CFLAGS += entries (somewhere about line 57). Cheers Mark On Wed, Dec 7, 2011 at 5:07 AM, Gabriele Mailing <gabriele.mailing@xxxxxxxxxxx> wrote: > Hello, > I successfully setup a VTL with tgt under Debian Squeeze that is operable > with mtx. Loading, unloading, labeling of virtual tapes works perfectly with > mtx and amanda backup. > I firstly used the tgt stock deb package, and after I built tgt with the > current git sources. > I tried to write to the tape device with tar, but when the image file > reached 2Gb, tar gave a "Cannot write: Input/output error", and found in > syslog the error: > > Dec 6 18:55:46 bunch tgtd: append_blk(175) Write of EOD blk header failed: > Invalid argument > Dec 6 18:55:47 bunch tgtd: tape_rdwr_request(604) io error 0x8badcb8 a 0 > 10240 0, Invalid argument > Dec 6 18:55:47 bunch tgtd: append_blk(168) Rewrite of blk header failed: > Invalid argument > > I followed the esamples in the docs to build the image files, and the tape > drive definition is this simple one: > > <backing-store /media/tgt/vtl/cleaning> > lun 1 > device-type tape > removable 1 > vendor_id "HP " > product_id "Ultrium 3-SCSI" > product_rev "D21W" > scsi_sn "HU012345AB" > scsi_id "HP LTO3 ULTRIUM" > </backing-store> > > Complete targets.conf with the definition of the changer is here: > http://pastebin.com/c0iG4Nyu > > Thank you for your suggestions, > Gabriele > -- > To unsubscribe from this list: send the line "unsubscribe stgt" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe stgt" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
