Albert Pauw wrote:
I changed /root/tapes to /root/btapes, and indeed using tgt-admin -e -v
the tape drives are
defined first now.
(...)
[root@orange ~]# mtx -f /dev/changer status
(after some 2 minutes of waiting)
no Data Transfer Element reported
and in dmesg, the following error was added
connection1:0: ping timeout of 5 secs expired, last rx 4294857161, last
ping 4294862161, now 4294867161
connection1:0: detected conn error (1011)
session1: session recovery timed out after 120 secs
So, things are not good.
But it works if you start tgtadm commands manually?
If it's really so, you have to find what is the difference between the
commands started by you manually and those started by tgt-admin.
Then:
- I'm able to fix tgt-admin to start commands in desired order,
- someone else is able to check if such command order should matter at all.
--
Tomasz Chmielewski
http://wpkg.org
--
To unsubscribe from this list: send the line "unsubscribe stgt" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
