Re: targets.conf problem, setting up tape drives

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/26/2009 03:57 PM, Tomasz Chmielewski wrote:
Albert Pauw wrote:
Attached my vtl script, this works when using an empty targets.conf file,
and setting up the target afterwards using this script.

So, does tgt-admin I sent you generate a proper config or not?


No, it looks like it is ok, login into this target created this way looks ok,
but trying to use the changer device gives problems:

[root@orange tgt]# mtx -f /dev/changer status
mtx: Request Sense: Long Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=0 (Unknown?!)
mtx: Request Sense: Sense Key=No Sense
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense: Additional Sense Code = 00
mtx: Request Sense: Additional Sense Qualifier = 00
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in CDB=no
mtx: Request Sense: SKSV=no
READ ELEMENT STATUS Command Failed

Looking at it using wireshark I can see that the Login Command is generated every 17-18 seconds,
even after the mtx command had failed.

So there seems to be something weirdly configured this way, compared to the "manually" created
device with a script.

Albert
--
To unsubscribe from this list: send the line "unsubscribe stgt" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux SCSI]     [Linux RAID]     [Linux Clusters]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]

  Powered by Linux