Albert Pauw wrote:
On 10/25/2009 12:57 PM, Tomasz Chmielewski wrote:
I'll look at this one. The problem is, "element_type" and "media_home"
are not yet supported in targets.conf.
Could you provide me with a tgtadm line which would use both
"element_type" and "media_home"?
Do you mean something like this?
tgtadm --lld iscsi --mode logicalunit --op update --tid 1 --lun 4
--params element_type=3,start_address=10,quantity=5,media_home=/root/tapes
Please note that media_home is not related to the actual element type,
in fact my script used an extra tgtadm line to define media_home
after setting up the element types, but I checked and the line above
works fine as well.
So, with your config:
element_type "1,start_address=1,quantity=1"
element_type "2,start_address=1000,quantity=24"
element_type "3,start_address=10,quantity=5"
element_type "4,address=500,tid=1,lun=1"
element_type "4,address=500,tid=1,lun=2"
element_type "4,address=500,tid=1,lun=3"
media_home "/root/tapes"
that would translate to:
tgtadm --lld iscsi --mode logicalunit --op update --tid 1 --lun 4 (starting each command,
and then the below --params in each command):
--params element_type "1,start_address=1,quantity=1",media_home=/root/tapes
--params element_type "2,start_address=1000,quantity=24",media_home=/root/tapes
--params element_type "3,start_address=10,quantity=5",media_home=/root/tapes
--params element_type "4,address=500,tid=1,lun=1",media_home=/root/tapes
--params element_type "4,address=500,tid=1,lun=2",media_home=/root/tapes
--params element_type "4,address=500,tid=1,lun=3",media_home=/root/tapes
Is it possible to specify multiple "media_home" parameters or is it one, and only one?
--
Tomasz Chmielewski
http://wpkg.org
--
To unsubscribe from this list: send the line "unsubscribe stgt" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
