On Wed, Feb 19, 2025 at 04:48:39PM +0100, Greg KH wrote: > On Fri, Feb 14, 2025 at 12:46:51PM +0100, Dave Penkler wrote: > > The GPIB drivers printed a lot of spurious console messages. This > > was linked to the level of code maturity, often using console > > messages for debug. > > > > This patch set cleans up the console messaging in the spirit of Greg's > > recommendation: "When drivers are successful, they should be quiet" > > > > All pr_info's have been removed except for one which is in the module > > init of the common core driver indicating that the GPIB subsystem is > > initialized. > > > > All dev_info's have been removed or changed to dev_dbg except for the > > attach and probe messages in the agilent and ni usb drivers. This is > > to facilitate the creation of config and udev scripts to ensure that a > > particular usb device is systematically attached to the same gpib > > device file. > > > > All custom debug and tty logging has been removed or replaced with > > dev_dbg. > > > > Error messages where the user can figure out what went wrong with > > errno have also been removed, particularly timeouts and interrupts > > during reads and writes which can occur quite frequently uneccessarily > > cluttering up the console log. > > > > The patches are 1 per driver. > > All but 4 of these applied, can you rebase and resend the remaining > ones? > > thanks, > > greg k-h Sure, thanks. (Could only find 3 that were not applied, will send those) -dave
